Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

A-Tech

A-Tech 4GB DDR3L 1600 DIMM 240-Pin 1.35V

SKU CH-SETY-CCZY3

A 4 GB DDR3L 1600 unbuffered DIMM at 1.35 V for desktop memory upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • Tested Frequency1600
  • Voltage1.35V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Adds 4 GB of capacity with a single 4 GB DDR3L module
  • Runs at 1600 MHz DDR3L speed rated PC3L-12800
  • Operates at low 1.35 V DDR3L voltage for reduced power draw
  • Fits standard 240-pin DIMM desktop slots
  • Tested for reliable non-ECC unbuffered desktop operation

4GB DDR3L 1600 DIMM for Desktop Upgrade

This module is a 4GB DDR3L 1600 (PC3L-12800) DIMM on a 240-pin unbuffered non-ECC stick. It runs at 1.35V and is designed as a direct replacement for Hynix HMT451U6AFR8A-PB, HMT451U6BFR8A-PB and HMT451U6DFR8A-PB modules in desktop computers.

Suits desktops needing low-voltage DDR3.

Builders upgrading a desktop that specifies DDR3L 1600 unbuffered non-ECC memory can use this kit. It is not suitable for laptops or small-form-factor systems that require SO-DIMM modules, nor for platforms that only accept registered or ECC memory.

1.35V DDR3L voltage decides fit

The single specification that determines compatibility is the 1.35V DDR3L operating voltage combined with the 240-pin DIMM form factor. Verify that your motherboard and CPU support DDR3L at this voltage before ordering.

Puncte forte

  • Adds 4 GB of capacity with a single 4 GB DDR3L module
  • Runs at 1600 MHz DDR3L speed rated PC3L-12800
  • Operates at low 1.35 V DDR3L voltage for reduced power draw
  • Fits standard 240-pin DIMM desktop slots
  • Tested for reliable non-ECC unbuffered desktop operation

Specificații

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
Tested Frequency1600
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Întrebări despre acest articol

Will this 4 GB DDR3L 1600 module work in a desktop that requires 1.35 V memory?

Yes, the module runs at 1.35 V, matching the DDR3L low-voltage standard used by many desktops.

Is the 240-pin DIMM compatible with the Hynix HMT451U6AFR8A-PB part I am replacing?

It is listed as a direct replacement for Hynix HMT451U6AFR8A-PB, HMT451U6BFR8A-PB and HMT451U6DFR8A-PB.

Does this kit support ECC or registered operation for a workstation board?

No, it is a non-ECC unbuffered UDIMM, so it will not provide ECC or registered functionality.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.