Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green SO-DIMM sticks with black chips, no heat spreader

A-Tech

A-Tech 4GB Kit (2x2GB) DDR3 1066MHz PC3-8500 SODIMM memory upgrade

SKU CH-JA0G-7DBXP

A 4 GB DDR3 1066 MHz SODIMM kit for compatible Apple MacBook, MacBook Pro, iMac and Mac mini models from 2008 to 2010

  • Capacity4GB (2 x 2GB)
  • SpeedDDR3 1066 (PC3 8500)
  • Voltage1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor Brand Chipset
  • 4GB kit (2×2GB) expands multitasking headroom on supported Macs
  • DDR3 1066MHz PC3-8500 matches factory memory speed exactly
  • 204-pin SO-DIMM form factor fits Late 2008 through Mid 2010 notebooks and desktops
  • 50V unbuffered non-ECC modules meet Apple electrical requirements
  • Validated for iMac, MacBook, MacBook Pro and Mac mini models listed

Kit details

This A-Tech kit supplies two 2GB DDR3 1066MHz SO-DIMM modules for a total of 4GB. It is built to the PC3-8500 standard and runs at 1.50V without ECC or buffering. The 204-pin form factor matches the slots used in the listed Apple notebooks, iMacs and Mac minis from 2008 to 2010.

Compatibility scope

The modules are validated for specific MacBook, MacBook Pro, iMac and Mac mini models released between 2008 and 2010, including 13, 15 and 17 inch MacBook Pro variants and 20, 21.5, 24 and 27 inch iMac variants. Systems that require registered or ECC memory, or that use a different DDR generation or pin count, cannot use this kit.

Deciding specification

The kit uses DDR3 SO-DIMM at 1066MHz (PC3-8500) with a 204-pin interface; if your Mac specifies a different speed, voltage or pin layout this memory will not fit or function.

Puncte forte

  • 4GB kit (2×2GB) expands multitasking headroom on supported Macs
  • DDR3 1066MHz PC3-8500 matches factory memory speed exactly
  • 204-pin SO-DIMM form factor fits Late 2008 through Mid 2010 notebooks and desktops
  • 50V unbuffered non-ECC modules meet Apple electrical requirements
  • Validated for iMac, MacBook, MacBook Pro and Mac mini models listed

Specificații

BrandA-Tech
SeriesA-Tech DDR3 Apple Mac RAM Memory Upgrades
Capacity4GB (2 x 2GB)
SpeedDDR3 1066 (PC3 8500)
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Mac Systems
FeaturesMajor Brand Chips

Întrebări despre acest articol

Should I choose the 4GB kit (2x2GB) or a single 4GB module for my Late 2008 MacBook Pro?

The kit provides two 2GB SO-DIMMs for dual-channel operation on supported MacBook Pro models; a single 4GB module would run in single-channel mode.

What does the PC3-8500 rating mean for everyday use on a Mid 2010 MacBook?

PC3-8500 indicates DDR3-1066 speed; the Mac’s memory controller will run the modules at 1066MHz, giving standard DDR3 bandwidth for that platform.

Will the 204-pin SO-DIMM fit the memory slot in a 2009 iMac?

Yes, the 204-pin DDR3 SO-DIMM form factor matches the slots used in the listed 2009 iMac models.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.