Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 240-pin DDR3L registered DIMM with black chips and silver label

A-Tech

A-Tech 8GB DDR3L 1600 ECC RDIMM 1Rx4 CL11 1.35V Server RAM

SKU CH-F44V-4E00W

8GB DDR3L 1600MHz ECC registered server DIMM, 1Rx4 CL11 1.35V, HP compatible

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity in server workloads
  • Registered buffering stabilises signal quality on 240-pin DDR3L modules
  • Low 1.35V DDR3L voltage reduces power draw versus standard DDR3
  • 1Rx4 single-rank layout simplifies memory controller scheduling
  • Compatible replacement for HP part numbers 676333-B21, 731656-381, 731765-B21, 731765-B211, 731765-S21, 735302-001

8GB DDR3L ECC RDIMM for Servers

This 8GB registered DIMM runs at DDR3L 1600 with CL11 latency and a 1.35V low-voltage profile. It uses major-brand chips in a 1Rx4 organisation to deliver error-correcting memory for server and workstation platforms that require registered modules.

Verify registered ECC support and DDR3L voltage

Confirm that your motherboard accepts registered ECC DIMMs and operates at 1.35V before ordering. Standard unbuffered or non-ECC boards will not post with this module, and 1.5V-only slots may not support the lower voltage.

Single 240-pin module frees remaining slots

The 1Rx4 layout places the full 8GB on one 240-pin stick, leaving additional DIMM sockets open for future capacity expansion. It slots directly into compatible HP part-numbered systems without adapters or configuration changes.

Puncte forte

  • ECC protection guards data integrity in server workloads
  • Registered buffering stabilises signal quality on 240-pin DDR3L modules
  • Low 1.35V DDR3L voltage reduces power draw versus standard DDR3
  • 1Rx4 single-rank layout simplifies memory controller scheduling
  • Compatible replacement for HP part numbers 676333-B21, 731656-381, 731765-B21, 731765-B211, 731765-S21, 735302-001

Specificații

BrandA-Tech
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Întrebări despre acest articol

What comes in the box and do I need anything else to install this module?

The box contains one 8 GB DDR3L 1600 ECC RDIMM module. No extra parts are required; the 240-pin DIMM installs directly into a compatible server motherboard slot.

How do I choose between the listed HP part numbers for my system?

Match the HP part number on your existing module or in your server manual — 676333-B21, 731656-381, 731765-B21, 731765-B211, 731765-S21 or 735302-001 — to confirm this module is the correct replacement.

What does the 1600 MHz rating mean once the module is running in my server?

The module operates at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35 V, delivering registered ECC bandwidth for stable server workloads.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.