Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with gold edge connectors and black memory chips on both sides

A-Tech

A-Tech 8GB DDR4 2400 ECC UDIMM 2Rx8 CL17 1.2V 288-Pin Server RAM

SKU CH-MXT0-4HYDJ

8 GB DDR4 ECC UDIMM running at 2400 MHz with CL17 latency for servers and workstations

  • CAS LatencyCL17
  • Rank2Rx8
  • ECC protection prevents data errors in critical workloads
  • CL17 CAS latency at DDR4 2400 MHz
  • 2Rx8 dual-rank organisation increases memory density
  • 2 V standard DDR4 voltage reduces power draw
  • 288-pin UDIMM fits compatible server and workstation slots

Server-grade ECC memory for workstations

This 8 GB DDR4 module adds ECC error correction to compatible servers and workstations. It runs at 2400 MHz with a CAS latency of 17 and operates at the standard 1.2 V. The unbuffered DIMM format fits 288-pin slots in systems that specifically support ECC UDIMM memory.

8 GB dual-rank capacity and DDR4-2400 speed

The single 8 GB stick uses a 2Rx8 dual-rank organisation to provide moderate capacity for virtualisation, databases or multi-user workloads. Bandwidth tops out at the PC4-19200 data rate, so memory-intensive tasks that need higher throughput will hit the module's speed ceiling.

Tested reliability and lifetime support included

Every unit undergoes quality-assurance testing before shipment to verify dependable operation. A-Tech backs the module with a lifetime warranty and provides US-based technical support for installation guidance and troubleshooting.

Puncte forte

  • ECC protection prevents data errors in critical workloads
  • CL17 CAS latency at DDR4 2400 MHz
  • 2Rx8 dual-rank organisation increases memory density
  • 2 V standard DDR4 voltage reduces power draw
  • 288-pin UDIMM fits compatible server and workstation slots

Specificații

CAS LatencyCL17
Rank2Rx8

Întrebări despre acest articol

Will this DDR4 2400 CL17 2Rx8 ECC UDIMM run alongside existing DDR4 2400 ECC UDIMM modules in my server?

Mixing modules of the same DDR4 2400 speed, ECC UDIMM type, and 1.2V voltage is generally supported, but the motherboard will operate all modules at the speed and timings of the slowest installed module; verify your system manual for qualified memory configurations.

How can I confirm the module is detected at DDR4 2400 with ECC active after installation?

Enter the system BIOS or UEFI and check the memory information screen; it should report 8 GB per module, a speed of 2400 MT/s, and ECC status as enabled or active.

Does the package contain only the single 8 GB 288-pin DIMM, or are extra items such as a heatsink or tools included?

The box contains one 8 GB DDR4 2400 ECC UDIMM 2Rx8 CL17 1.2V 288-pin module; no heatsink, tools, or additional accessories are supplied.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.