Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips, gold edge connector, thin rectangular stick

A-Tech

A-Tech 8GB DDR4 2666MHz ECC SODIMM CL19 1.2V 260-Pin Micron Replacement

SKU CH-MCJ7-VFP6J

8GB DDR4 2666MHz ECC SODIMM CL19 1.2V 260-pin replacement for Micron MTA9ASF1G72HZ-2G6E2

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • ECC protection guards data integrity in critical workloads
  • 2666 MHz DDR4 speed handles demanding multitasking
  • 20 V operation keeps power draw low
  • 260-pin SODIMM fits compatible laptop and microserver slots
  • Tested replacement for Micron MTA9ASF1G72HZ-2G6E2

8GB DDR4 ECC SODIMM for Micron Microserver

This 8GB DDR4 2666MHz ECC SODIMM replaces the Micron MTA9ASF1G72HZ-2G6E2 module in microserver, server and workstation systems. The 260-pin unbuffered design operates at standard 1.2V DDR4 voltage with CL19 latency. It is built for owners who need error-correcting memory in a compact laptop form factor.

Thermals noise and power draw

Running at 1.20V, the module draws minimal power and produces negligible heat without a heat spreader. Passive cooling inside a typical microserver chassis is sufficient. Silent operation adds no audible noise to the system.

ECC unbuffered SODIMM requirement

This part is an ECC unbuffered SODIMM; systems that require registered or non-ECC memory will not accept it. Buyers who need non-ECC modules or higher capacities should verify their platform specifications before ordering.

Puncte forte

  • ECC protection guards data integrity in critical workloads
  • 2666 MHz DDR4 speed handles demanding multitasking
  • 20 V operation keeps power draw low
  • 260-pin SODIMM fits compatible laptop and microserver slots
  • Tested replacement for Micron MTA9ASF1G72HZ-2G6E2

Specificații

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA9ASF1G72HZ-2G6E2
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMTA9ASF1G72HZ-2G6E2
Recommend UseCompatible Replacement for Micron MTA9ASF1G72HZ-2G6E2

Întrebări despre acest articol

How do I install this 260-pin DDR4 SODIMM and what step do people often miss?

Align the notch on the module with the slot key, insert at a 30-degree angle, then press down firmly until both side clips click; the step many miss is pushing until both clips engage fully.

Will this ECC unbuffered module need any firmware updates or component replacements over time?

No firmware or component replacements are required; the module has no heat spreader and runs at standard 1.2V, so it operates maintenance-free for its service life.

At 2666 MHz CL19, what limit appears first during sustained heavy workloads?

The CAS latency of 19 cycles at 2666 MHz sets the primary latency floor; sustained throughput is bounded by the PC4-21300 data rate.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.