Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Smoke base clear top polycarbonate case for Raspberry Pi Model A+

Adafruit

Adafruit Raspberry Pi A+ Case Smoke Base Clear Top

SKU CH-GNN9-0ERQH

Protects the Raspberry Pi Model A+ with a snap-fit polycarbonate shell featuring a smoke base, clear top, and cut-outs for cables, camera, display, GPIO and Micro SD

  • TypePrototyping Products
  • Fits Raspberry Pi Model A+ only
  • Snaps securely into base with snug lid
  • Ultra-durable polycarbonate withstands daily transport
  • Slim openings for cables, camera, display and GPIO
  • Compact 73 x 63 x 26 mm footprint weighs 39 g

Raspberry Pi Model A+ Enclosure

This case is built exclusively for the Raspberry Pi Model A+. It is made from ultra-durable, super-glossy polycarbonate with a smoke base and clear top. The Pi snaps securely into the base and the lid fits snugly on top. It provides a basic, classic enclosure for the single-board computer.

Sustained Use and Access

The polycarbonate construction is tough enough to survive daily transport in a bookbag or toolbox. Slim openings allow all cables to remain connected while the case is closed. An easy-to-remove beveled slot gives quick access to the Micro SD card without opening the enclosure.

Build Details and Expansion

The base measures 73mm x 63mm x 26mm with a 4mm thick lid and weighs 39g. Dedicated slots accommodate the Pi Camera and Display modules. A GPIO cable can extend through a dedicated space and the lid can be removed to add HATs to the A+ board. The case does not fit Model A, B, B+ or Pi 2 boards.

Puncte forte

  • Fits Raspberry Pi Model A+ only
  • Snaps securely into base with snug lid
  • Ultra-durable polycarbonate withstands daily transport
  • Slim openings for cables, camera, display and GPIO
  • Compact 73 x 63 x 26 mm footprint weighs 39 g

Specificații

TypePrototyping Products

Întrebări despre acest articol

Does the polycarbonate case trap heat when the Raspberry Pi A+ runs continuously?

The enclosure uses a smoke base and clear top with slim cable openings and a bevelled Micro SD slot that allow passive airflow around the board.

What Raspberry Pi board is required for this enclosure to work?

The case is designed exclusively for the Raspberry Pi Model A+ and will not fit Model A, B, B+ or Pi 2 boards.

Can I keep a GPIO ribbon cable connected while the lid is on?

A dedicated space in the base lets a GPIO cable extend out so the lid still fits snugly over the 73mm by 63mm footprint.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.