Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Clear PVC tubing 10 mm ID 13 mm OD 1 metre length

Alphacool

Alphacool AlphaTube HF Flexible Tubing 10/13 mm 1 m Ultra Clear PVC 17494

SKU CH-MG8J-MFBVN

Flexible PVC tubing with 10 mm inner and 13 mm outer diameter, one metre length, rated for -10 to 80 °C and 2 bar working pressure

  • TypeTubing

Length 1m

Color Clear

  • Ultra-clear PVC shows coolant colour and flow
  • 10 mm inner and 13 mm outer diameter fits standard 3/8" ID fittings
  • Flexible yet kink-resistant for tight bends in custom loops
  • Rated from -10 °C to 80 °C for reliable operation
  • 1 metre length suits most single-loop builds

Alphacool AlphaTube HF 10/13 mm PVC Tubing

This flexible PVC tubing connects water-cooling components such as pumps, radiators, blocks and reservoirs. The 10 mm inner and 13 mm outer diameter suit standard compression or barb fittings. One metre length provides enough material for typical single-loop builds. It is sold new for custom-loop enthusiasts and system integrators.

Clear Ultra Clear Finish and Kink Resistance

The transparent Ultra Clear colour shows coolant flow and dye effects without tinting. A 65–70 A-Shore hardness balances easy routing with resistance to kinking on tighter bends. This means fewer sharp-angle fittings are required during assembly. The material stays flexible across the stated temperature range.

One-Metre Length and Pressure Limits

A single 1 m piece covers most CPU-to-GPU or CPU-to-radiator runs in mid-tower cases. The hose withstands a working pressure of 2 bar and a burst pressure of 8 bar, giving headroom for standard pump pressures. Runs exceeding one metre or complex multi-block loops will need additional lengths. Not suited for builders who need pre-bent rigid tubing or larger diameters.

Puncte forte

  • Ultra-clear PVC shows coolant colour and flow
  • 10 mm inner and 13 mm outer diameter fits standard 3/8" ID fittings
  • Flexible yet kink-resistant for tight bends in custom loops
  • Rated from -10 °C to 80 °C for reliable operation
  • 1 metre length suits most single-loop builds

Specificații

TypeTubing

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How often will the PVC tubing need replacement in a continuous loop?

The material is rated for a working temperature range of -10 to 80 °C and a burst pressure of 8 bar, so under normal loop conditions it does not have a scheduled replacement interval.

What is the first limit reached when the loop runs at sustained pressure?

The working pressure limit is 2 bar; exceeding this value is the primary constraint during continuous operation.

Does the tubing generate any noise or additional heat while the pump runs all day?

The tubing itself is passive — it adds no noise and no measurable heat, with a hardness of 65-70 A-Shore ensuring it stays kink-free at typical flow rates.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.