Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black vibration-absorbing standoff kit with four absorbers, screws, washers and nuts

Alphacool

Alphacool Decoupling Standoff Kit 13701 Model 52007 Black

SKU CH-B03W-GQG2D

Vibration-absorbing standoffs and hardware isolate water-cooling pumps and other components for near-silent operation

  • ColorBlack
  • FeaturesVibration absorbing standoffs and screws from Alphacool.
  • Vibration-free pump mounting keeps the enclosure silent
  • Decoupling standoffs absorb vibration so noise cannot amplify
  • Four absorbers, screws, washers and nuts included for secure fitting
  • Kit works with any water-cooling component needing isolation
  • Black finish matches dark-themed builds

Pump vibration isolation

The Alphacool Decoupling Standoff Kit 13701 Model 52007 provides vibration-free mounting for water-cooling pumps inside a PC enclosure. Four black vibration absorbers with matching screws washers and nuts prevent pump vibration from transferring to the chassis. The pump runs almost inaudibly as a result. Other components can also be mounted with the same kit.

Simple four-point installation

Each corner uses one absorber one screw one washer and one nut so the hardware fits standard pump mounting holes. The parts are small and can drop into tight spaces around tubing so keep them contained during assembly. Over-tightening the nuts reduces the absorber travel and defeats the isolation.

Builders silencing a noisy pump

This kit suits anyone who hears pump hum transmitted through the case and wants a direct mechanical fix. It does not help if the noise comes from fluid turbulence or coil whine. Buyers needing adjustable-height mounts or larger thread sizes should look at something else.

Puncte forte

  • Vibration-free pump mounting keeps the enclosure silent
  • Decoupling standoffs absorb vibration so noise cannot amplify
  • Four absorbers, screws, washers and nuts included for secure fitting
  • Kit works with any water-cooling component needing isolation
  • Black finish matches dark-themed builds

Specificații

BrandAlphacool
Model52007
ColorBlack
FeaturesVibration absorbing standoffs and screws from Alphacool.

Întrebări despre acest articol

How can I confirm the Alphacool 52007 standoffs are absorbing pump vibration after installation?

Power on the loop and listen at the case panel; the pump should be almost inaudible with no resonant hum transmitted to the chassis.

What hardware is included with the 13701 kit and what must I source separately?

The box contains four vibration absorbers, four mounting screws, four washers and four nuts; you only need to provide the pump or component you intend to mount.

Which version of the Alphacool decoupling kit should I choose for a standard D5 or DDC pump?

Model 52007 (part 13701) is the single black kit designed for vibration-free mounting of typical water-cooling pumps and other components.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.