Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black NBR70 O-ring 34.5 x 2 mm for Alphacool GPX GPU block

Alphacool

Alphacool Replacement O-Ring 34.5 x 2mm NBR70 GPX 95085

SKU CH-TP5T-X0YYC

Replacement O-ring 34.5 x 2 mm NBR70 seals Alphacool GPX GPU water blocks

  • ColorBlack
  • FeaturesReplacement O-Ring for Alphacool GPX GPU Block
  • Fits Alphacool GPX GPU blocks precisely
  • 5 x 2 mm size matches original spec
  • NBR70 compound resists coolant degradation
  • Black silicone seals without staining tubing
  • Single replacement ring restores leak-free operation

Alphacool GPX GPU Block O-Ring

This black silicone O-ring is a direct replacement seal for Alphacool GPX series GPU water blocks. It restores the original sealing surface when the factory ring has aged or been damaged during maintenance. The part is sold new and individually packaged.

Simple press-fit installation

The ring seats in the existing groove on the GPX block without tools. Take care to clean the channel thoroughly before fitting; residual coolant or debris is the most common cause of leaks after reassembly. Stretching the ring excessively while positioning it can create a permanent deformation that compromises the seal.

Sized for GPX groove only

The 34.5 mm by 2 mm cross-section matches the specific gland dimensions of the Alphacool GPX GPU block. It will not seal correctly in fittings, reservoirs or blocks from other series that use different groove widths or diameters. The NBR70 material is rated for typical liquid-cooling temperatures and coolant chemistries.

Puncte forte

  • Fits Alphacool GPX GPU blocks precisely
  • 5 x 2 mm size matches original spec
  • NBR70 compound resists coolant degradation
  • Black silicone seals without staining tubing
  • Single replacement ring restores leak-free operation

Specificații

BrandAlphacool
Model95085
ColorBlack
FeaturesReplacement O-Ring for Alphacool GPX GPU Block

Întrebări despre acest articol

How can I confirm the 34.5 x 2mm O-ring is sealing my Alphacool GPX GPU block correctly after installation?

Fill the loop and run the pump at low speed while watching the block's acrylic top and fitting edges; no droplets or pressure drop means the NBR70 ring is seated properly.

What comes in the package and is any extra hardware needed for the replacement?

The box contains one black 34.5 x 2mm NBR70 O-ring (part 95085); no tools or additional seals are included, so reuse the existing compression fittings and screws.

Which O-ring size matches my Alphacool GPX block — 34.5 x 2mm or another dimension?

Choose the 34.5 x 2mm NBR70 ring (part 95085); it is the direct replacement specified for the GPX GPU block channel groove.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.