Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black fully modular ATX 3.1 power supply with 135mm striped axial fan

ASRock

ASRock TC-1300T 1300 W fully modular ATX 3.1 power supply

SKU CH-K28A-A8RSN MPN TC-1300T

Delivers 1300 W through a fully modular ATX 3.1 design with Cybenetics Titanium efficiency and a 135 mm FDB fan rated Lambda A+ for quiet operation

  • ColorBlack
  • TypeATX3.1 & PCIe5.1
  • Maximum Power1300 W
  • Fans135mm Striped Axial FDB Fan
  • ModularFull Modular
  • Energy-EfficientCybenetics Titanium

Options 1300W

  • 1300 W output with 80 PLUS Titanium efficiency
  • Cybenetics Titanium and Lambda A+ certified for low noise
  • ATX 3.1 and PCIe 5.1 ready for modern GPUs
  • Fully modular cables with native 12V-2x6 connector and TempGuard
  • 135 mm FDB fan with iCool mode for silent low-load operation

1300 W ATX 3.1 Power Supply

The ASRock TC-1300T delivers 1300 W of fully modular power built to the ATX 3.1 and PCIe 5.1 specifications. It targets high-end desktop builders who need reliable headroom for demanding graphics cards and multi-core processors. The unit carries 80 PLUS Titanium and Cybenetics Titanium efficiency ratings alongside a Cybenetics A+ noise certification. Japanese capacitors are used throughout for long-term stability.

Native 12V-2x6 Connector with TempGuard

The single specification that decides compatibility is the native 12V-2x6 connector, which supports the PCIe 5.1 235% power excursion requirement. A dual-colour design lets you confirm full insertion at a glance, while an integrated NTC sensor monitors connector temperature and signals the PSU to protect against overheating. This connector replaces older 12VHPWR implementations and is mandatory for current-generation flagship GPUs.

Fully Modular Cabling with iCool Fan Control

Full modularity means you connect only the cables your build requires, reducing clutter and improving airflow inside the case. The 135 mm striped axial FDB fan operates under iCool intelligent control: it remains off at low to medium loads for silent running and spins up only when load or temperature rises. A +5 V Boost switch adds 200 mV to the +5 V rail, maintaining approximately 5.2 V when voltage drop is detected, which helps stability on heavily loaded 5 V circuits.

Puncte forte

  • 1300 W output with 80 PLUS Titanium efficiency
  • Cybenetics Titanium and Lambda A+ certified for low noise
  • ATX 3.1 and PCIe 5.1 ready for modern GPUs
  • Fully modular cables with native 12V-2x6 connector and TempGuard
  • 135 mm FDB fan with iCool mode for silent low-load operation

Specificații

BrandASRock
ModelTC-1300T
ColorBlack
TypeATX3.1 & PCIe5.1
Maximum Power1300 W
Fans135mm Striped Axial FDB Fan
ModularFull Modular
Energy-EfficientCybenetics Titanium
PSU Noise LevelCybenetics A+
Greutate la expediere4.40 kg
Dimensiunile coletului400 × 272 × 118 mm

Alte versiuni ale acestui model

1 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How much power can a 1300 W unit actually deliver when a GPU spikes?

The unit is rated to handle up to 235% power excursion, so it can absorb short transients well above its continuous 1300 W rating without shutting down.

What does ATX 3.1 and PCIe 5.1 compliance mean for cable limits?

It includes a native 12V-2x6 connector that supports the higher current demands of modern graphics cards under the latest specification.

Will the 135 mm fan fit a standard ATX case cut-out?

Yes, the 135 mm striped axial FDB fan uses the conventional ATX mounting pattern, so it installs in any case designed for a regular ATX power supply.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.