NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
ASUS
Supports LGA 2011-v3 CPUs with Intel X99 chipset and up to 64GB DDR4 in a Micro ATX form factor
This ASUS X99-M WS motherboard targets builders who need a compact Intel X99 platform for professional workloads. The Micro ATX layout fits smaller chassis while still delivering the chipset’s multi-threaded capability. It suits users upgrading an existing LGA 2011-v3 system or assembling a dedicated render node. Buyers who require newer socket types or higher memory ceilings should look elsewhere.
The single specification that decides fit is the 64 GB DDR4 limit imposed by the X99 chipset and the board’s four DIMM slots. Populate all slots with matching modules to reach the ceiling for memory-heavy applications. If your workflow demands more capacity or a different memory standard, this board cannot meet the requirement.
The board draws modest power for the chipset and voltage regulation under typical multi-core loads. Passive heatsinks on the PCH and VRM zones keep temperatures stable without adding active noise. A standard case airflow path is sufficient; no specialised cooling is mandated by the design.
| Brand | ASUS |
|---|---|
| Model | ASUS X99-M WS |
| CPU Socket Type | LGA 2011-v3 |
| Chipset | Intel X99 |
| Maximum Memory Supported | 64GB |
The four DDR4 slots can hold up to 64 GB total, so a fully populated system reaches that limit without needing a larger ATX board.
SATA caps sequential throughput at the interface's native rate, so any connected SSD or hard drive will not exceed that ceiling.
The socket follows the standard 2011-v3 mounting pattern, so any cooler rated for that layout will fit within the Micro ATX keep-out zone.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?