Barrow Mods 10x16mm Soft Tube Fittings White

Compression fittings for 10×16 mm soft tubing

These G1/4 threaded connectors join 10 mm inner-diameter by 16 mm outer-diameter soft tubing in a custom liquid-cooling loop. The white finish matches light-themed builds while the standard thread fits most water blocks, radiators, reservoirs and pumps. Each fitting seals with an internal O-ring and a knurled compression nut that tightens by hand. They are sold as individual extend connectors for repair or loop expansion.

Suited for builders extending

The fittings suit anyone lengthening an existing run or replacing a worn connector in a 10×16 mm soft-tube system. They do not serve builders using hard tubing, smaller-bore soft tubing or push-fit connectors, and they cannot adapt to non-G1/4 ports without additional adapters. Buyers wanting coloured O-rings, angled elbows or rotary joints should look at other fitting styles.

Verify tubing and thread compatibility before

Confirm every tube in the loop measures 10 mm ID and 16 mm OD so the compression rings seat correctly. Check that every component you will connect to exposes a female G1/4 port. Ensure you have enough fittings for each tube end — two per component — and plan for any angled or rotary adapters the routing requires.