Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver rectangular 2.5 inch SATA SSD with black label, 7mm thick

BIWIN STORAGE TECHNOLOGY LIMITED

BIWIN STORAGE TECHNOLOGY LIMITED 128GB MLC 2.5" 7mm SATA internal SSD

SKU CH-P13W-2RSEY

A 128 GB MLC SATA drive in a 7 mm 2.5" form factor delivers up to 511 MB/s read and 430 MB/s write with a 2,000,000-hour MTBF

  • Device TypeInternal Solid State Drive (SSD)
  • Form Factor2.5"
  • Capacity128GB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Max Sequential Read511 MB/s

Options 128GB

  • 128 GB MLC capacity stores more data reliably
  • 511 MB/s sequential read speeds up boot and load times
  • 430 MB/s sequential write accelerates file saves and transfers
  • 94 W active power draw keeps laptop battery drain low
  • 2,000,000 hours MTBF signals long-term drive endurance

Capacity and interface

This internal solid-state drive provides 128GB of storage and connects through a SATA III interface rated at 6Gb/s. It is designed for desktops and laptops that accept a 2.5 inch drive and can serve as a primary or secondary volume.

Build quality and connectors

The drive uses MLC flash memory and a standard 7mm SATA connector, fitting common drive bays and caddies without adapters. Power draw is 0.25W at idle and 2.94W when active, and the unit operates from 0 to 70 °C with an MTBF of 2,000,000 hours.

Practical limits of the SATA interface

Sequential read tops out at 511 MB/s and sequential write at 430 MB/s, which are the practical ceilings of the SATA III bus. The drive also supports dynamic power management and SMART Trim for sustained operation within those limits.

Puncte forte

  • 128 GB MLC capacity stores more data reliably
  • 511 MB/s sequential read speeds up boot and load times
  • 430 MB/s sequential write accelerates file saves and transfers
  • 94 W active power draw keeps laptop battery drain low
  • 2,000,000 hours MTBF signals long-term drive endurance

Specificații

BrandBIWIN
Device TypeInternal Solid State Drive (SSD)
Form Factor2.5"
Capacity128GB
Memory ComponentsMLC
InterfaceSATA III
Max Sequential Read511 MB/s
Max Sequential Write430 MB/s
MTBF2,000,000 hours
Power Consumption (Idle)0.25W
Power Consumption (Active)2.94W
Operating Temperature0 to 70 °C
Storage Temperature-40 to 85 °C
Operating Humidity5 to 95%
Height7.0mm
Width69.8
Depth100.2mm
Weight50g

Alte versiuni ale acestui model

3 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will this 2.5-inch drive fit in a laptop bay that takes a 7 mm high drive?

Yes, the drive is 7.0 mm high, matching the standard slim 2.5-inch bay used in most laptops.

Does the SATA III interface work with an older SATA II controller?

Yes, the drive is compatible with SATA 3Gb/s controllers and will run at the slower link speed.

What steady power draw should I expect when the drive is idle?

Idle consumption is 0.25 W according to the main specification table.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.