Brute Networks
Brute Networks 16GB DDR4-2666 ECC SODIMM 2Rx8 1.2V 3TQ38AA
16 GB DDR4-2666 ECC SODIMM with 2Rx8 organisation, 1.2 V operation and HPE 3TQ38AA compatibility
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- Voltage1.20V
- ECCYes
- Rank2Rx8
- 16 GB capacity adds headroom for virtualization workloads
- DDR4 2666 MT/s speed keeps data moving through busy channels
- ECC protection corrects single-bit errors to preserve data integrity
- 2 V operation reduces power draw in dense server chassis
- 2Rx8 dual-rank layout boosts memory controller efficiency
Compatible HPE 16 GB ECC SODIMM
This Brute Networks module delivers 16 GB of DDR4 ECC memory at 2666 MT/s in a 288-pin SODIMM form factor. It runs at 1.2 V with a 2Rx8 rank configuration using major-brand DRAM chips. The part is 100 % compatible with HPE part number 3TQ38AA and carries a lifetime warranty.
Server upgrades needing HPE-qualified SODIMMs
IT teams maintaining HPE ProLiant or Apollo platforms that require 2666 MHz ECC SODIMMs can install this module with factory-warranty assurance. Buyers needing DIMM-length modules, non-ECC memory, or speeds above 2666 MT/s should select a different part.
DDR4-2666 2Rx8 ECC SODIMM specification
The decisive specification is the DDR4-2666 2Rx8 ECC SODIMM profile at 1.2 V. Only systems that accept this exact speed, rank, voltage, and form factor will recognise the full 16 GB capacity.
Puncte forte
- 16 GB capacity adds headroom for virtualization workloads
- DDR4 2666 MT/s speed keeps data moving through busy channels
- ECC protection corrects single-bit errors to preserve data integrity
- 2 V operation reduces power draw in dense server chassis
- 2Rx8 dual-rank layout boosts memory controller efficiency
Specificații
| Brand | HPE |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Întrebări despre acest articol
Will this 16GB DDR4-2666 ECC SODIMM run in my older DDR4 server that currently uses 1.2V modules?
Yes, the module operates at the standard 1.20V DDR4 voltage and matches the DDR4-2666 (PC4-21300) speed, so it will work alongside existing 1.2V DDR4 memory in compatible systems.
How can I confirm the 2Rx8 ECC module is detected correctly after installation?
Enter the server BIOS or UEFI and verify the total capacity shows the added 16GB, the speed reads 2666 MT/s, and ECC status is reported as enabled or active.
Does the 3TQ38AA-equivalent SODIMM come alone or with any extra parts I need to buy?
The box contains only the single 288-pin DDR4 SODIMM; no brackets, cables, thermal pads or additional hardware are included or required for installation.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



