SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00498937BTC
În stoc
Brute Networks
Brute Networks KVTD4-BN 32GB DDR4-2133 ECC LRDIMM 4Rx4 CL15 1.2V
Dell-compatible 32 GB DDR4-2133 ECC LRDIMM with CL15 latency, 1.2 V operation and 4Rx4 organisation for server upgrades
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 32 GB capacity expands server memory headroom
- ECC protection detects and corrects single-bit errors
- Load-reduced 4Rx4 design supports high-density configurations
- 20 V operation lowers power draw per module
- Dell-compatible KVTD4 part ensures drop-in fit
Dell-Compatible 32 GB DDR4 LRDIMM
This module is a Dell-compatible 32 GB DDR4-2133 load-reduced DIMM built for server platforms that require ECC memory. It operates at 1.2 V with a CL15 latency and a 4Rx4 organisation across 288 pins. The part matches Dell part number KVTD4 and uses major-brand DRAM from Samsung, SK Hynix or Micron.
Capacity and Headroom
The 32 GB density provides substantial memory headroom for virtualisation hosts, database workloads and memory-intensive applications running on supported Dell servers. Four-rank organisation maximises capacity per slot, though total system capacity remains limited by the platform's memory-controller and slot count.
DDR4-2133 Interface Limits
The DDR4-2133 interface delivers up to 17 000 MB/s of theoretical bandwidth per module, which becomes the ceiling for memory-bound tasks. Higher-speed DDR4 modules will down-clock to this rate when mixed, and platforms that only support registered DIMMs cannot use load-reduced modules without explicit qualification.
Puncte forte
- 32 GB capacity expands server memory headroom
- ECC protection detects and corrects single-bit errors
- Load-reduced 4Rx4 design supports high-density configurations
- 20 V operation lowers power draw per module
- Dell-compatible KVTD4 part ensures drop-in fit
Specificații
| Brand | Dell |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
Întrebări despre acest articol
Will this 32GB DDR4-2133 LRDIMM work alongside my existing DDR4-2133 registered DIMMs in a Dell server?
Mixing load-reduced and registered DIMMs is not supported by Dell platforms; all slots must use the same memory technology for the server to POST and run stably.
How can I confirm the 32GB DDR4-2133 LRDIMM is running at the correct speed and ECC after installation?
Enter the system BIOS or iDRAC interface and verify the memory shows 2133 MT/s, CL15, 1.20 V and ECC enabled for each installed module.
Does the KVTD4-BN 32GB DDR4-2133 LRDIMM ship alone or with extra parts, and what must I source separately?
The module ships as a single 288-pin LRDIMM; no cables, brackets or additional components are included or required for installation.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
