Centon Electronics
Centon Dash 500GB 2.5" SATA internal SSD
A 500 GB 2.5 inch SATA solid-state drive delivering sequential read speeds up to 1100 MB/s and write speeds up to 1000 MB/s
- Device TypeInternal Solid State Drive (SSD)
- Fast file transfers with 1100 MB/s read speed
- Quick saves at 1000 MB/s write speed
- 500 GB capacity stores large media libraries
- USB 3.2 and SATA interfaces connect to Windows and macOS
- ISO 9001:2015 compliance ensures consistent quality
Centon Dash 500GB SATA SSD
This 2.5 inch internal solid-state drive offers 500GB of storage for desktops or laptops with a SATA III connection. It delivers sequential read speeds up to 1100MB/s and write speeds up to 1000MB/s for faster boot times and application loading. The drive suits users upgrading older systems or adding secondary storage.
Upgrading from a mechanical hard drive
Replacing a traditional hard disk with this SSD removes moving parts and significantly reduces data access latency. The jump is worth it when the existing drive is a bottleneck for system responsiveness or file transfers. The SATA interface ensures compatibility with a wide range of older and current motherboards.
Fits a standard 2.5 inch drive bay
Installation requires a 2.5 inch mounting location and a SATA data and power cable from the host system. No additional drivers are needed for Windows or macOS recognition. The drive frees up an external port by serving as internal storage instead of the portable configuration it is also sold in.
Puncte forte
- Fast file transfers with 1100 MB/s read speed
- Quick saves at 1000 MB/s write speed
- 500 GB capacity stores large media libraries
- USB 3.2 and SATA interfaces connect to Windows and macOS
- ISO 9001:2015 compliance ensures consistent quality
Specificații
| Brand | Centon |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
Întrebări despre acest articol
Does the 2.5" Centon Dash SSD fit a standard 7 mm laptop bay?
The 2.5" form factor matches the common 7 mm height used in most laptops and drive caddies.
What is the correct way to connect the SATA III drive and the USB 3.2 adapter?
Attach the SATA data and power cables to the drive first, then plug the USB 3.2 adapter into the host; reversing the order can prevent detection.
When should the USB Type-C and Type-A connector be replaced?
Replace the connector if the USB 3.2 link drops below the 1100 MB/s read or 1000 MB/s write rates, signalling worn contacts.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
