SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00501555BTC
În stoc
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1333 Probook 6460B 6465B 6470B memory upgrade
16 GB dual-channel DDR3 1333 kit for HP ProBook 6460B, 6465B and 6470B laptops
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB total capacity from two 8 GB modules
- DDR3 1333 speed with CL9 timing for responsive performance
- 204-pin SO-DIMM form factor fits ProBook 6460B, 6465B, 6470B
- 5 V unbuffered non-ECC design matches factory specifications
- Major-brand chipset backed by CMS lifetime warranty
HP ProBook 6460B 6465B 6470B upgrade kit
This 16GB kit contains two 8GB DDR3 SO-DIMM modules built for the HP ProBook 6460B, 6465B and 6470B. It uses the 204-pin form factor and runs at 1333 MHz with CL9 timing. The modules are unbuffered, non-ECC and operate at 1.5V. Computer Memory Solutions validates compatibility for the listed notebook models.
Capacity and headroom for DDR3 notebooks
The 16GB total fills both memory slots on supported ProBook models. It suits everyday multitasking, office suites and light virtual machines on these platforms. Systems limited to 12GB or 8GB maximum by the chipset will not use the full capacity. Buyers needing more than 16GB must choose a different platform.
Thermals and power in normal use
Standard DDR3 SO-DIMMs without heat spreaders run within JEDEC thermal limits at 1.5V. No active cooling is required inside the notebook chassis. Power draw stays low during typical workloads and idle periods. The modules produce no audible noise.
Puncte forte
- 16 GB total capacity from two 8 GB modules
- DDR3 1333 speed with CL9 timing for responsive performance
- 204-pin SO-DIMM form factor fits ProBook 6460B, 6465B, 6470B
- 5 V unbuffered non-ECC design matches factory specifications
- Major-brand chipset backed by CMS lifetime warranty
Specificații
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600SODRH |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp/Compaq Probook 6460B, Probook 6465B, Probook 6470B |
| Package Content | 2 Memory RAM Sticks |
Întrebări despre acest articol
Will the 16GB DDR3 1333 kit run reliably in a ProBook 6460B that currently has 4GB installed?
The kit is validated for the ProBook 6460B and operates at 1.5V CL9; the notebook supports up to 16GB so the full 2×8GB set will be recognised.
How can I confirm the memory is running at DDR3 1333 CL9 after installation?
Open Task Manager or CPU-Z and check the speed field — it should read 1333 MHz with 9-9-9 timings at 1.5V.
Does the package contain only the two SODIMM sticks or are tools and a manual included?
The box contains the two 204-pin DDR3 SODIMM modules; no screwdriver, manual or additional hardware is supplied.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
