Computer Memory Solutions
Computer Memory Solutions 16GB (4x4GB) DDR2 400 ECC Registered DIMM memory upgrade - B48
16 GB kit of four 4 GB DDR2 400 registered ECC DIMMs for Dell PowerEdge SC1420 servers
- Capacity16GB (4 x 4GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 400 (PC2 3200)
- CAS LatencyCL3
- Timing3-3-3
- Voltage1.8V
- 16 GB server-grade memory for Dell PowerEdge SC1420
- ECC registered DDR2 400 protects data integrity
- 4 × 4 GB dual-rank modules fill four slots
- CL3 1.8 V timing meets PC2-3200 spec
- 240-pin DIMM form factor installs directly
Server-Ready DDR2 Kit
This 16 GB kit contains four 4 GB DDR2 400 registered ECC DIMMs built for the Dell PowerEdge SC1420. Each module runs at 1.8 V with CL3 timing and a 240-pin interface. The registered buffer and dual-rank organisation suit server workloads that demand error correction and signal stability.
Replaces Standard Unbuffered Memory
The upgrade swaps non-ECC or unbuffered sticks for registered ECC modules, adding data integrity and electrical load reduction on the memory bus. The jump is worth it when the SC1420 firmware requires registered DIMMs or when the application cannot tolerate silent data corruption. Systems that only accept unbuffered memory cannot use this kit.
Handles Multi-Threaded Server Loads
Four populated slots deliver 16 GB total capacity, giving headroom for virtualisation guests, database caches and concurrent user sessions on the SC1420. The dual-rank density fills each channel efficiently, though the DDR2 400 ceiling limits throughput compared with later DDR generations. Workloads needing more than 16 GB or higher bandwidth will outgrow this configuration.
Puncte forte
- 16 GB server-grade memory for Dell PowerEdge SC1420
- ECC registered DDR2 400 protects data integrity
- 4 × 4 GB dual-rank modules fill four slots
- CL3 1.8 V timing meets PC2-3200 spec
- 240-pin DIMM form factor installs directly
Specificații
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512723200ECCREG2R4 |
| Capacity | 16GB (4 x 4GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Timing | 3-3-3 |
| Voltage | 1.8V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Dell Poweredge Sc1420 (1420Sc) |
| Package Content | 1 Memory RAM Stick |
Întrebări despre acest articol
Does this 240-pin DDR2 kit fit the Dell PowerEdge SC1420 server?
Yes, the four 4 GB modules are validated for the Dell PowerEdge SC1420 (1420SC) and use the 240-pin DDR2 form factor required by that system.
What is the correct order for installing the four registered ECC modules?
Populate the DIMM slots in the sequence shown in the SC1420 service manual; a common mistake is skipping the first slot of each channel, which prevents the registered signal from initialising.
How can I tell when one of the 1.8 V dual-rank sticks needs replacing?
Run the server's built-in memory diagnostics; persistent correctable ECC errors on a specific module indicate that stick should be swapped.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



