SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.005016BTC
În stoc
Computer Memory Solutions
Computer Memory Solutions 2GB (2x1GB) DDR2 667 Memory Upgrade A104
2GB DDR2 667 MHz kit with two 1GB unbuffered DIMMs for Intel 945 chipset motherboards
- Capacity2GB (2 x 1GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Timing5-5-5
- Voltage1.8V
- 2GB kit expands system memory for smoother multitasking
- DDR2 667MHz speed matches Intel D945 motherboard requirements
- 8V low-voltage DDR2 modules reduce power draw
- 240-pin DIMM form factor fits four-slot Intel D945 boards
- CL5 5-5-5 timings deliver responsive DDR2 performance
Compatibility
This 2 GB kit contains two 1 GB DDR2 modules built for Intel D945GBo, D945Gcz, D945Gnt and D945Gpm motherboards. The 240-pin DIMMs are unbuffered and non-ECC, matching the board specifications exactly. Builders restoring or upgrading these specific platforms can install the pair without configuration changes. Systems needing higher density or a different memory generation will not accept these sticks.
Thermals
Each module operates at the standard DDR2 voltage of 1.8 V and carries no heat spreader, relying on case airflow for cooling. At the rated 667 MHz speed with CL5 timing the power draw remains low, so the memory adds minimal heat inside the chassis. Typical desktop cooling is sufficient to keep temperatures in check during everyday workloads. No active cooling on the memory itself is required.
Sustained load
The 5-5-5 timings and major-brand chipset maintain stable operation through extended sessions at the rated DDR2 667 frequency. Unbuffered signalling and the 2Rx8 organisation keep electrical loading predictable on the four-slot motherboards. The kit delivers consistent throughput for long rendering, compilation or server tasks without throttling. Workloads demanding ECC protection or registered modules must use different hardware.
Puncte forte
- 2GB kit expands system memory for smoother multitasking
- DDR2 667MHz speed matches Intel D945 motherboard requirements
- 8V low-voltage DDR2 modules reduce power draw
- 240-pin DIMM form factor fits four-slot Intel D945 boards
- CL5 5-5-5 timings deliver responsive DDR2 performance
Specificații
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM128645300DIMMDR |
| Capacity | 2GB (2 x 1GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Intel D945GBo, D945Gcz, D945Gnt, D945Gpm Motherboard |
| Package Content | 2 Memory RAM Sticks |
Întrebări despre acest articol
How do I install the 240-pin DDR2 modules into my Intel D945GBo motherboard, and what step is often missed?
Align the notch on each 240-pin stick with the slot key, press down firmly until both side clips click, then verify the BIOS reports 667 MHz speed.
What maintenance or replacement will the CM128645300DIMMDR kit need over time?
No routine maintenance is required; if a stick fails, replace it with another 1.8 V DDR2 667 module to keep the 2 GB dual-channel configuration.
What limit appears first when the memory runs at full load for extended periods?
The 1.8 V DDR2 667 rating caps sustained throughput at PC2-5300 bandwidth, so heavy workloads hit that ceiling before thermal throttling becomes a factor.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 USD
0.00095959BTC
În stoc