Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green circuit-board sticks with black memory chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions 4GB (2×2GB) DDR3 1333 PC3-10600 CL9 1.5V 240-pin DIMM kit for HP 6005 Pro

SKU CH-0XGH-T26MT

A 4 GB DDR3 kit with two 2 GB unbuffered DIMMs running at 1333 MHz CL9 for HP 6005 Pro desktops

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4 GB dual-channel kit upgrades HP 6005 Pro desktops
  • 1333 MHz DDR3 speed matches PC3-10600 system spec
  • CL9 9-9-9 timing keeps latency low
  • 5 V unbuffered non-ECC modules fit standard DIMM slots
  • Two 2 GB sticks install in matched pair for stability

Kit contents and purpose

This kit supplies 4 GB of DDR3 system memory as two 2 GB modules. It is built for HP Compaq Business Desktop 6005 Pro small-form-factor, microtower and ultra-slim chassis. The DIMMs run at 1333 MHz with CL9 timing and 1.5 V.

Fit for purpose

The modules suit owners of a 6005 Pro who need a straightforward capacity increase to 4 GB. Buyers with platforms that require ECC, registered DIMMs or a different DDR generation cannot use this kit. Systems already at their maximum supported memory will gain nothing.

Build integration

Each stick uses a 240-pin unbuffered non-ECC layout, so the board must provide standard DDR3 slots. The low-profile design without a heat spreader keeps clearance tight for compact 6005 Pro cases. Two occupied slots leave any remaining banks free for future expansion.

Puncte forte

  • 4 GB dual-channel kit upgrades HP 6005 Pro desktops
  • 1333 MHz DDR3 speed matches PC3-10600 system spec
  • CL9 9-9-9 timing keeps latency low
  • 5 V unbuffered non-ECC modules fit standard DIMM slots
  • Two 2 GB sticks install in matched pair for stability

Specificații

BrandComputer Memory Solutions
ModelCM2566410600DIMM1R8
Capacity4GB (2 x 2GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Desktop 6005 Pro Series
Package Content2 Memory RAM Sticks

Întrebări despre acest articol

Does this kit need a 240-pin DDR3 slot on the motherboard to install?

Yes, each module uses a 240-pin DDR3 DIMM connector and requires a matching DDR3 slot on the HP 6005 Pro motherboard.

Can I keep my existing 1333 MHz DDR3 modules and add this 4 GB kit alongside them?

The kit runs at 1333 MHz with CL9 timing and 1.5 V, so it will operate at the same speed and voltage as other DDR3-1333 modules already installed.

How can I confirm the system sees the full 4 GB after installing both sticks?

Check the BIOS memory summary or Windows Task Manager; both should report 4 GB total at 1333 MHz with the correct 9-9-9 timing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.