Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1066 CL7 MacBook Pro 13" Mid-2010

SKU CH-NCPT-P6QWB

8GB DDR3 1066 CL7 kit with two 204-pin SO-DIMMs for the MacBook Pro 13-inch Mid-2010 Core 2 Duo 2.66

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB kit upgrades a Mid-2010 13" MacBook Pro to its maximum memory
  • DDR3 1066 CL7 timing matches the factory specification for stable operation
  • 5 V unbuffered SO-DIMM modules install without voltage or buffering conflicts
  • 204-pin form factor fits the two factory memory slots exactly
  • Two 4 GB sticks enable dual-channel bandwidth on the Core 2 Duo platform

MacBook Pro 13" Mid-2010 memory kit

This 8GB kit contains two 4GB DDR3 SO-DIMM modules built for the Apple MacBook Pro 13" Mid-2010 with the 2.66 GHz Core 2 Duo processor. It is intended for owners of that specific notebook who need to reach the factory memory ceiling. The modules are unbuffered, non-ECC and run at 1.5V.

DDR3 1066 speed ceiling

The MacBook Pro 13" Mid-2010 memory controller tops out at DDR3 1066 (PC3-8500), so faster DDR3 modules will down-clock to this rate. The kit matches the native 1066 MHz specification with CL7 7-7-7 timings and 204-pin form factor. Buyers expecting higher bandwidth from faster-rated sticks will not see it on this platform.

Two-slot 8GB maximum

This notebook provides only two SO-DIMM sockets and the firmware caps total memory at 8GB, so the 2 x 4GB configuration fills every slot and reaches the hard limit. Builders who want more than 8GB cannot do so with this machine.

Puncte forte

  • 8GB kit upgrades a Mid-2010 13" MacBook Pro to its maximum memory
  • DDR3 1066 CL7 timing matches the factory specification for stable operation
  • 5 V unbuffered SO-DIMM modules install without voltage or buffering conflicts
  • 204-pin form factor fits the two factory memory slots exactly
  • Two 4 GB sticks enable dual-channel bandwidth on the Core 2 Duo platform

Specificații

BrandComputer Memory Solutions
ModelCM512648500SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Macbook Pro "Core 2 Duo" 2.66 13" Mid-2010
Package Content2 Memory RAM Sticks

Întrebări despre acest articol

Should I choose the 8GB kit or look for a larger capacity for my MacBook Pro 13" Mid-2010?

The Mid-2010 13" model tops out at 8GB across its two slots, so this 2x4GB kit fills the machine to its maximum supported memory.

What does the 1066MHz speed mean once the modules are installed in the MacBook Pro?

The system memory controller runs at 1066MHz, so these DDR3-1066 CL7 modules operate at their rated frequency without down-clocking.

Will the 204-pin DDR3 SO-DIMM interface work with the MacBook Pro 13" Mid-2010 memory slots?

Yes, the 204-pin DDR3 SO-DIMM form factor matches the two slots in the Mid-2010 13" MacBook Pro exactly.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.