Computer Memory Solutions
Computer Memory Solutions CM10246417000SO 8GB DDR4 2133MHz SODIMM for Dell Precision 7000 7510
8GB DDR4 2133MHz SODIMM module with CL15 timing and 1.2V operation for Dell Precision 7000 7510 systems
- Capacity8GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Timing15-15-15
- Voltage1.2V
- 8 GB capacity adds responsive multitasking headroom for Dell Precision 7510
- DDR4 2133 MHz speed matches the platform memory bus exactly
- CL15 15-15-15 timings deliver low latency for everyday workloads
- 2 V operation reduces power draw and heat in the chassis
- 260-pin SODIMM form factor fits the Precision 7000 series slot directly
Dell Precision 7000 7510 SODIMM
This 8 GB DDR4 module is built for the Dell Precision 7000 Series model 7510. It uses a 260-pin SO-DIMM form factor and runs at 2133 MHz with CL15 timing. The stick is unbuffered, non-ECC and operates at 1.2 V. It suits professionals who need a straightforward capacity increase for a supported mobile workstation.
Upgrade from 4 GB or empty slot
The Precision 7510 ships with two SODIMM sockets and a 16 GB ceiling. Adding this 8 GB stick fills one slot and doubles a typical 4 GB factory configuration. The jump is worthwhile when multitasking or running memory-hungry applications pushes the current amount into paging. A second identical module can be added later to reach the 16 GB maximum.
Fits the 7510 two-slot layout
Installation requires only the laptop's existing memory bay; no heat spreader or extra clearance is needed. The single rank 2Rx8 organisation leaves the second socket free for a matching upgrade. Because the module is validated for the 7510, it avoids the incompatibility risks that generic DDR4 SO-DIMMs can introduce in this platform.
Puncte forte
- 8 GB capacity adds responsive multitasking headroom for Dell Precision 7510
- DDR4 2133 MHz speed matches the platform memory bus exactly
- CL15 15-15-15 timings deliver low latency for everyday workloads
- 2 V operation reduces power draw and heat in the chassis
- 260-pin SODIMM form factor fits the Precision 7000 series slot directly
Specificații
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246417000SO |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Precision 7000 Series (7510) |
| Package Content | 1 Memory RAM Stick |
Întrebări despre acest articol
Does the 260-pin SODIMM fit the Dell Precision 7510 memory slots?
Yes, the module is a 260-pin DDR4 SODIMM built for the Precision 7000 series 7510 and installs directly into the laptop's SO-DIMM sockets.
What is the correct orientation when inserting the 260-pin DDR4 SODIMM into the Precision 7510?
Align the notch on the module's gold edge with the key in the slot, press firmly at a slight angle until seated, then press down until the side clips click — the 1.2 V module only goes in one way.
Will the CL15 2133 MHz module need a firmware update or voltage change later?
No firmware or voltage adjustment is required; the JEDEC-standard 1.2 V DDR4-2133 CL15 timing is handled automatically by the Precision 7510's memory controller.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



