SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00500875BTC
În stoc
Computer Memory Solutions
Computer Memory Solutions CM1024642666DIMM 16GB (2x8GB) DDR4 2666 CL19 memory upgrade
16 GB DDR4 kit at 2666 MHz CL19, validated for EliteDesk 705 G5, 800 G5 and Z4 G4 workstations
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Timing19-19-19
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 2666 MHz speed matches supported platform specs
- CL19 latency keeps timing tight for everyday workloads
- 2 V operation reduces power draw per module
- Tested compatible with HP EliteDesk 705 G5, 800 G5 and Z4 G4 systems
16 GB DDR4 2666 Kit for HP Workstations
This 16 GB kit contains two 8 GB DDR4 2666 modules designed for HP EliteDesk 705 G5 SFF, 800 G5 Tower and SFF, and Workstation Z4 G4 (Core X) systems. Unbuffered, non-ECC DIMMs install directly into the 288-pin slots without additional configuration. The kit suits offices and professionals who need a straightforward capacity increase for these specific platforms.
Capacity and Headroom for DDR4 2666 Systems
Each module provides 8 GB at CL19 19-19-19 timing and 1.20 V, giving 16 GB total across the pair. The supported platforms offer four sockets and a maximum of 128 GB, so this kit occupies half the slots and leaves room for further expansion. Performance scales with the slowest installed module or CPU capability, so matching pairs are recommended for best results.
DDR4 2666 Interface Limits
The DDR4 2666 (PC4 21300) interface caps transfer rates at the rated speed, and all modules in the system will run at the lowest common frequency. A 64-bit operating system is required to address more than 4 GB of memory. Builders needing ECC, registered buffering, higher frequencies, or capacities beyond 128 GB must choose a different memory type.
Puncte forte
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 2666 MHz speed matches supported platform specs
- CL19 latency keeps timing tight for everyday workloads
- 2 V operation reduces power draw per module
- Tested compatible with HP EliteDesk 705 G5, 800 G5 and Z4 G4 systems
Specificații
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1024642666DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Timing | 19-19-19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP/Compaq EliteDesk 705 G5 Series SFF, 800 G5 Series Tower, 800 G5 Series SFF, Workstation Z4 G4 (Core X) |
| Package Content | 2 Memory RAM Sticks |
Întrebări despre acest articol
Will the 2666 MHz DDR4 modules run at full speed alongside slower DDR4 sticks already in my EliteDesk 800 G5?
All memory in the system will run at the speed of the slowest installed module or the CPU capability, so mixing with slower DDR4 will downclock these 2666 MHz sticks.
How can I verify the kit is recognised at 2666 MHz with CL19 timings after installation?
Check the BIOS memory information or a tool such as CPU-Z; it should report 2666 MHz, CL19-19-19 timing and 1.20 V for each 8 GB module.
Does the package include only the two 8 GB DIMMs or are any brackets or cables supplied?
The package contains two 288-pin DDR4 DIMM modules; no brackets, cables or additional accessories are included.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
