Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Computer Memory Solutions

Computer Memory Solutions CM128644200SODR 2GB (2x1GB) DDR2 533MHz CL4 SODIMM memory upgrade

SKU CH-HB99-ZMNC2

A 2 GB DDR2 SODIMM kit (2×1 GB, 533 MHz, CL4) validated for the Dell Inspiron 9300 notebook

  • Capacity2GB (2 x 1GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 533 (PC2 4200)
  • CAS LatencyCL4
  • Timing4-4-4
  • Voltage1.8V
  • 2GB total capacity with a matched pair of 1GB modules
  • DDR2 533MHz speed rated at PC2-4200 for compatible systems
  • CL4 CAS latency with 4-4-4 timing for responsive operation
  • 200-pin unbuffered SODIMM form factor fits Dell Inspiron 9300 notebook
  • 8V operating voltage using major brand chipset components

Ready for Dell Inspiron 9300

This kit provides 2 GB of DDR2 memory in two 1 GB SO-DIMM modules. It is built for the Dell Inspiron 9300 notebook and uses the 200-pin form factor required by that system. The unbuffered, non-ECC design matches the original specification.

200-pin SO-DIMM layout

Each module fits the standard 200-pin DDR2 slot found in the compatible notebook. No heat spreader is fitted, so the sticks sit low inside tight chassis spaces. The major-brand chipset and 2Rx8 organisation support reliable daily operation.

Low voltage DDR2 operation

The memory runs at 1.8 V with CL4 4-4-4 timings at 533 MHz. Standard DDR2 power draw keeps heat output modest in normal use. Passive cooling from the notebook chassis is sufficient for this unbuffered kit.

Puncte forte

  • 2GB total capacity with a matched pair of 1GB modules
  • DDR2 533MHz speed rated at PC2-4200 for compatible systems
  • CL4 CAS latency with 4-4-4 timing for responsive operation
  • 200-pin unbuffered SODIMM form factor fits Dell Inspiron 9300 notebook
  • 8V operating voltage using major brand chipset components

Specificații

BrandComputer Memory Solutions
ModelCM128644200SODR
Capacity2GB (2 x 1GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 533 (PC2 4200)
CAS LatencyCL4
Timing4-4-4
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Inspiron 9300 Notebook
Package Content2 Memory RAM Sticks

Întrebări despre acest articol

What speed and standard does this DDR2 533MHz CL4 kit run at, and what bandwidth does that cap at?

The modules are rated DDR2 533 (PC2-4200) with CL4 4-4-4 timings, delivering up to 4200 MB/s theoretical bandwidth per stick.

What physical slot and pin count do these 200-pin SO-DIMM sticks need to fit the Dell Inspiron 9300?

They require a 200-pin DDR2 SO-DIMM slot; the Inspiron 9300 has two such sockets, and the kit includes two 1GB sticks to fill both.

How are the sticks installed in the Inspiron 9300, and what step is often missed?

Power off, remove the battery, open the memory door, align the notch, insert each stick at an angle, then press down until the side clips lock — forgetting to re-seat the second stick fully is the common error.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.