Computer Memory Solutions
Computer Memory Solutions CM256645300SO 4GB (2 x 2GB) DDR2 667 SODIMM
DDR2 667 MHz SODIMM kit adds 4 GB across two 2 GB modules for compatible HP Pavilion dv9500 series notebooks
- Capacity4GB (2 x 2GB)
- Type200-Pin DDR2 SO-DIMM
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Timing5-5-5
- Voltage1.8V
- 4 GB total capacity from two 2 GB modules
- DDR2 667 MHz speed for compatible HP Pavilion dv9500 series
- 200-pin SODIMM form factor fits DDR2 laptop slots
- CL5 latency with 5-5-5 timing at 1.8 V
- Unbuffered non-ECC design for standard notebook use
System-Specific DDR2 Upgrade Kit
This 4 GB kit contains two 2 GB DDR2-667 SO-DIMMs built for HP Pavilion dv9500 series notebooks. The modules run at 1.8 V with CL5 5-5-5 timing and use unbuffered, non-ECC chips on a 200-pin PCB. Computer Memory Solutions validates compatibility with the dv9500t, dv9500, dv9500Z and dv9501tx models.
Owners of Listed HP Pavilion Notebooks
The kit suits users whose dv9500-series laptop accepts DDR2 SO-DIMMs and has two free slots for a 4 GB total. Buyers whose machine requires DDR3 SO-DIMMs cannot use these modules because the pin layout and voltage differ. Systems already at the 4 GB maximum or with only one slot will not benefit from the second stick.
DDR2-667 (PC2-5300) Speed Rating
The decisive specification is the DDR2-667 speed grade, also marked PC2-5300. Only notebooks designed for this exact DDR2 rate will recognise the modules at full frequency; faster or slower DDR2 standards are not supported by this part number.
Puncte forte
- 4 GB total capacity from two 2 GB modules
- DDR2 667 MHz speed for compatible HP Pavilion dv9500 series
- 200-pin SODIMM form factor fits DDR2 laptop slots
- CL5 latency with 5-5-5 timing at 1.8 V
- Unbuffered non-ECC design for standard notebook use
Specificații
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM256645300SO |
| Capacity | 4GB (2 x 2GB) |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp Pavilion Dv9500T, Dv9500, Dv9500Z, Dv9501Tx |
| Package Content | 2 Memory RAM Sticks |
Întrebări despre acest articol
My HP Pavilion dv9500 has two memory slots — will this 2 x 2 GB kit fill both of them?
Yes, the kit contains two 200-pin DDR2 SO-DIMM modules and the compatible systems listed have two sockets with a maximum of 4 GB total, so the kit fully populates the machine.
I plan to keep the original PC2-5300 stick already in the laptop — will this CL5 kit run stably alongside it?
Both the existing module and this kit are rated DDR2 667 (PC2-5300) with CL5 5-5-5 timing at 1.8 V, so they will operate at the same speed and voltage without manual adjustment.
After installing the two modules, how can I confirm the system recognises the full 4 GB at the correct 667 MHz speed?
Open Task Manager or the BIOS memory information screen; it should show 4 GB total capacity, DDR2 type, and a running frequency of 667 MHz.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



