Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR3L SO-DIMM sticks in anti-static bag

Computer Memory Solutions

Computer Memory Solutions CM5126412800SOSRL 8GB (2x4GB) DDR3L 1600 Synology DiskStation DS218+ memory upgrade

SKU CH-7NAT-PCP1C

A dual-stick 8 GB DDR3L 1600 kit built for Synology DiskStation DS218+ NAS units

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.35V
  • 8 GB kit expands DS218+ capacity to 16 GB
  • DDR3L 1600 MHz speed matches system specification
  • 35 V low-voltage modules reduce power draw
  • CL11 11-11-11 timings deliver responsive performance
  • 204-pin SO-DIMM form factor fits DS218+ slots

Synology DS218+ 8GB DDR3L Kit

This 8GB kit contains two 4GB DDR3L SO-DIMM modules built for the Synology DiskStation DS218+. The memory runs at 1600MHz with CL11 timing and operates at a low 1.35V. Unbuffered, non-ECC chips and a 204-pin form factor match the NAS specifications exactly.

NAS owners adding capacity

The kit suits DS218+ owners who want to reach the 16GB maximum across the two available slots. Builders working on different Synology models, desktop PCs, or laptops should verify their own platform requirements because this kit is validated only for the DS218+.

DDR3L 1600 CL11 at 1.35V

The decisive specification is DDR3L 1600 (PC3L 12800) with CL11 latency at 1.35V. Systems that need a different DDR generation, a higher voltage, registered DIMMs, or ECC support will not accept these modules.

Puncte forte

  • 8 GB kit expands DS218+ capacity to 16 GB
  • DDR3L 1600 MHz speed matches system specification
  • 35 V low-voltage modules reduce power draw
  • CL11 11-11-11 timings deliver responsive performance
  • 204-pin SO-DIMM form factor fits DS218+ slots

Specificații

BrandComputer Memory Solutions
ModelCM5126412800SOSRL
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSynology DiskStation DS218+
Package Content2 Memory RAM Sticks

Întrebări despre acest articol

Will this 204-Pin DDR3L 1600 kit run reliably inside my Synology DiskStation DS218+ alongside any existing 1.35V modules?

The kit is built for the DS218+ and uses 1.35V DDR3L SO-DIMMs, so it matches the voltage and pin-out of the factory memory.

How can I confirm the CL11 1Rx8 sticks are recognised at the correct 1600 MHz speed after installation?

Open DSM Control Panel, choose Info Center, and check that the memory section shows 8 GB running at 1600 MHz with CL11 timing.

Does the box contain only the two 4 GB SO-DIMMs or are tools and thermal pads included?

The package includes the two 4 GB DDR3L SO-DIMM sticks; no screwdriver, thermal pads or additional accessories are supplied.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.