Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 120 mm case fan with dual ARGB rings and hybrid frame

Cooler Master

Cooler Master MasterFan MF120 Halo² case fan 120 mm 2050 RPM MFL-B2DN-21NP2-R2

SKU CH-8GFB-RDYA8 MPN MFL-B2DN-21NP2-R2

120 mm case fan with dual-loop ARGB lighting, 2050 RPM maximum speed and 51.88 CFM airflow at 27 dB(A)

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120 x 120 x 25 mm
  • Fan Thickness25mm
  • Bearing TypeRifle

Fan Size 120mm

Model MF120 Halo²

  • Dual-loop ARGB rings boost illumination by 50% for vivid case lighting
  • Enlarged Air Balance blades increase airflow by 10% to 51.88 CFM
  • Hybrid frame keeps full blade size while adding structural rigidity
  • Upgraded driver IC cuts noise to 27 dB(A) at full speed
  • PWM control spans 0–2050 RPM for silent or maximum cooling

Single 120 mm case fan for case.

The Cooler Master MasterFan MF120 Halo² is a 120 mm case fan built for standard case, liquid-cooler or air-cooler mounting. It uses a rifle bearing and a 4-pin PWM connector to vary speed from 0 to 2,050 RPM, delivering 51.88 CFM (88.14 m³/h) at a rated 27 dB(A). The black frame measures 25 mm thick and includes enlarged Air Balance blades for improved flow.

Dual-loop ARGB Gen 2 rings and cable clips

Dual-loop addressable RGB rings increase illumination area by 50% and support ARGB Gen 2 effects when connected to a 3-pin 5 V header; the fan defaults to a spectrum cycle if no header is detected. An upgraded driver IC boosts cooling performance while reducing noise. Clips are supplied to secure both PWM and ARGB cables, and an extended 3-pin plug permits daisy-chaining multiple fans.

Check 120 mm mount spacing and 5 V ARGB header

Verify that your chassis or radiator has 120 mm mounting points with 25 mm clearance for the fan thickness. Confirm your motherboard or controller provides a 5 V 3-pin addressable RGB header if you want full Gen 2 control; otherwise the fan will run its default lighting pattern. Ensure the 4-pin PWM header can supply the required current for speed regulation.

Puncte forte

  • Dual-loop ARGB rings boost illumination by 50% for vivid case lighting
  • Enlarged Air Balance blades increase airflow by 10% to 51.88 CFM
  • Hybrid frame keeps full blade size while adding structural rigidity
  • Upgraded driver IC cuts noise to 27 dB(A) at full speed
  • PWM control spans 0–2050 RPM for silent or maximum cooling

Specificații

BrandCOOLER MASTER
SeriesMasterFan
ModelMasterFan MF120 Halo²
Part NumberMFL-B2DN-21NP2-R2
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120 x 120 x 25 mm
Fan Thickness25mm
Bearing TypeRifle
RPM0~2050 ± 5% RPM
Air Flow51.88 CFM (88.14 m³/h)
Noise Level27 dB(A)
Power Connector4 Pin
ColorBlack
LEDAddressable RGB
Greutate la expediere0.27 kg
Dimensiunile coletului178 × 130 × 25 mm

Alte versiuni ale acestui model

3 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.