Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Full-tower E-ATX case with dual tempered glass panels and League of Legends Janna artwork

Corn Electronics

Corn Electronics GR701 E-ATX PC case, 420 mm radiator, 4×140 mm fans, Janna edition

SKU CH-MQ1R-3YQNA

Full-tower E-ATX case with dual 420 mm radiator mounts and four pre-installed 140 mm PWM fans

  • TypeATX Full Tower

Options Janna

Vedeți celelalte 48 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

  • Supports E-ATX motherboards up to 12 by 10.9 inches
  • Fits 420 mm radiators in front and top positions
  • Four 140 mm PWM fans pre-installed for strong airflow
  • Holds graphics cards up to 460 mm long with metal bracket
  • Dual tempered glass panels showcase the build

E-ATX chassis with dual 420 mm radiator support

This full-tower case fits E-ATX boards up to 12 by 10.9 inches plus ATX, Micro-ATX and Mini-ITX. It ships with four 140 mm PWM fans already installed and offers nine expansion slots plus three vertical positions. Tempered glass covers both side panels for a clear view of the interior.

Pre-installed fans and removable filters simplify

Three front fans and one rear fan are fitted at the factory so airflow works immediately. Dust filters on front, top and bottom pull out for cleaning without tools. The 34 mm cable-management channel behind the motherboard tray keeps routing tidy and reduces the chance of pinched wires.

Check motherboard width GPU length

The tray accepts boards up to 10.9 inches wide; wider E-ATX models will not fit. Graphics cards must be 460 mm or shorter and CPU coolers 190 mm or lower. Power supplies longer than 240 mm cannot be installed. Buyers needing longer GPUs or deeper PSUs should look elsewhere.

Puncte forte

  • Supports E-ATX motherboards up to 12 by 10.9 inches
  • Fits 420 mm radiators in front and top positions
  • Four 140 mm PWM fans pre-installed for strong airflow
  • Holds graphics cards up to 460 mm long with metal bracket
  • Dual tempered glass panels showcase the build

Specificații

Modelinternational version
TypeATX Full Tower

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I confirm the four pre-installed 140 mm PWM fans and the ARGB hub are functioning after building in the GR701?

Power on the system and verify all four 140 mm fans spin — three at the front, one at the rear — then use the front LED control button to cycle lighting modes; the ARGB hub responds only when the button changes colours.

Which accessories ship inside the GR701 box and which items must I source separately?

The case includes three front 140 mm PWM fans, one rear 140 mm PWM fan, a metal GPU holder, removable dust filters for front, top and bottom, and the ARGB fan hub; motherboard, CPU cooler, GPU, power supply and storage drives are not included.

The spec sheet lists both a USB 4.0 Type-C and a USB 3.2 Gen 2x2 Type-C front port — how do I know which version my unit provides?

The manufacturer notes the front Type-C port may be either USB 4.0 or USB 3.2 Gen 2x2 depending on region; check the port marking on the front I/O panel or the shipping invoice to identify the exact standard.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.