DELL
DELL 400-AAFV 4TB 3.5" SAS 7200 RPM internal hard drive
A 4 TB 3.5" SAS hard drive spinning at 7200 RPM with a 12 Gb/s interface for enterprise storage
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity4TB
- RPM7200 RPM
- Average Latency12Gb/s
- UsageFor Enterprise Storage
- 4 TB capacity supports large enterprise datasets
- 7200 RPM spindle delivers consistent nearline throughput
- SAS 12 Gb/s interface enables fast host connectivity
- 5 inch form factor fits standard server bays
- New condition ensures full manufacturer reliability
Dell 400-AAFV 4TB Nearline SAS Drive
This Dell 400-AAFV is a 4TB 3.5-inch nearline SAS hard drive spinning at 7200 RPM with a 12Gb/s interface. It arrives as a bare drive intended for enterprise storage arrays and compatible Dell servers.
Suits administrators expanding nearline SAS capacity
It fits IT teams adding bulk storage to systems that accept 3.5-inch SAS drives running at 7.2K speed. It does not suit builders whose chassis or controller only supports 2.5-inch form factors or a different drive interface.
12Gb/s SAS interface
The drive communicates over a 12Gb/s SAS link, so the host controller and backplane must support that signalling rate. Verify the system accepts 3.5-inch nearline SAS drives before purchase.
Puncte forte
- 4 TB capacity supports large enterprise datasets
- 7200 RPM spindle delivers consistent nearline throughput
- SAS 12 Gb/s interface enables fast host connectivity
- 5 inch form factor fits standard server bays
- New condition ensures full manufacturer reliability
Specificații
| Brand | Dell |
|---|---|
| Model | 400-AAFV |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 4TB |
| RPM | 7200 RPM |
| Average Latency | 12Gb/s |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
Întrebări despre acest articol
Does my system need a 12 Gb/s SAS controller to use this 4TB drive?
The drive uses a SAS 12Gb/s interface, so a compatible SAS controller or backplane is required for operation.
Will this 7200 RPM Nearline SAS drive work in a server that currently runs 6 Gb/s SAS drives?
Yes, the 12 Gb/s SAS interface is backward compatible with 6 Gb/s SAS infrastructure, allowing mixed-speed deployments.
How can I verify the 4TB capacity and 7200 RPM speed are recognised after installation?
Check the drive properties in your RAID controller BIOS or operating system disk management; both should report 4TB capacity and 7200 RPM.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
