DELL
DELL 400-AGTP 1.8TB 10K SAS 6Gbps 2.5" internal hard drive
A 1.8 TB SAS hard drive spinning at 10 000 RPM in a 2.5 inch form factor for high-speed enterprise storage
- InterfaceSAS 6Gb/s
- Capacity1.8TB
- RPM10000 RPM
- Form Factor2.5"
- 8 TB capacity stores large datasets and applications
- 10 000 RPM spindle speed accelerates data access for demanding workloads
- SAS 6 Gb/s interface delivers reliable enterprise-grade connectivity
- 5 inch form factor fits dense server and storage chassis
- New condition ensures full manufacturer specifications and reliability
Capacity and interface
This new Dell 400-AGTP is a 1.8TB 2.5-inch internal hard drive with a SAS 6Gb/s interface spinning at 10000 RPM. It is built for desktop systems that accept 2.5-inch SAS drives. The unit arrives in retail or OEM packaging depending on supply.
Suited for SAS bays, not SATA-only
The drive fits servers or workstations with a 2.5-inch SAS backplane and a controller that supports 6Gb/s SAS. Buyers whose chassis or controller only provide SATA ports cannot use this drive. Systems limited to 3.5-inch bays will also need a different form factor.
SAS 6Gb/s interface decides compatibility
The single specification that determines fit is the SAS 6Gb/s interface; the drive must connect to a SAS controller, not a SATA-only port. Verify the host bus adapter and backplane support SAS before purchase.
Puncte forte
- 8 TB capacity stores large datasets and applications
- 10 000 RPM spindle speed accelerates data access for demanding workloads
- SAS 6 Gb/s interface delivers reliable enterprise-grade connectivity
- 5 inch form factor fits dense server and storage chassis
- New condition ensures full manufacturer specifications and reliability
Specificații
| Interface | SAS 6Gb/s |
|---|---|
| Capacity | 1.8TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Întrebări despre acest articol
What is the SAS 6Gbps interface and what does it limit in practice?
The SAS 6Gbps interface caps the maximum data transfer rate at six gigabits per second, so the drive cannot exceed that bandwidth even if the controller is faster.
What physical space and mounting does the 2.5-inch form factor require?
The drive fits a standard 2.5-inch drive bay and uses the same screw-hole pattern as other 2.5-inch SAS or SATA drives.
How is the 400-AGTP installed and which step is often missed?
Slide the drive into the bay, secure it with four screws, then attach both the SAS data cable and the power connector; the step most often missed is connecting the power cable.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
