Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Dell 2.5 inch SAS hard drive with tray

DELL

DELL 400-AJUP 1.8TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-EEX7-K7SK5

A 1.8 TB 2.5" SAS hard drive spinning at 10,000 RPM with a 12 Gb/s interface for server storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • 8 TB capacity stores more enterprise data
  • 10000 RPM spindle delivers faster read access
  • SAS 12 Gb/s interface supports high-throughput workloads
  • 5 inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Dell 400-AJUP 1.8TB SAS Drive

The Dell 400-AJUP is a 1.8TB 2.5-inch SAS hard drive spinning at 10000 RPM. It targets administrators expanding storage in compatible Dell PowerEdge or PowerVault servers. The 12Gb/s interface supports high-throughput workloads. Hot-swap capability allows replacement without system downtime.

Verify SAS Backplane and Tray Fit

Confirm the server backplane supports 12Gb/s SAS signalling before ordering. The drive ships as a bare unit with a tray; ensure the tray matches the specific server generation. Check that the RAID controller or HBA recognises 1.8TB capacity. Firmware compatibility should be validated on the Dell support site.

Integrates Into Hot-Swap Bays

This drive slots directly into 2.5-inch hot-swap bays, freeing 3.5-inch slots for other uses. The SAS interface connects to existing backplanes without extra cabling. Dual-port SAS architecture provides path redundancy for critical arrays. The 10K spindle speed balances latency and capacity for mixed read-write workloads.

Puncte forte

  • 8 TB capacity stores more enterprise data
  • 10000 RPM spindle delivers faster read access
  • SAS 12 Gb/s interface supports high-throughput workloads
  • 5 inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Specificații

BrandDell
Model400-AHNS
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Întrebări despre acest articol

Does the drive arrive with a mounting tray or caddy, or do I need to source one separately?

The unit is supplied as a bare drive without a tray; a compatible 2.5" SAS tray must be purchased separately for installation in a PowerEdge or PowerVault bay.

The listing shows both 1.2TB and 1.8TB — which capacity will I actually receive?

The manufacturer part number 400-AJUP corresponds to the 1.8TB model, while the specifications table lists the 1.2TB variant 400-AHNS; verify the part number on your order to confirm the exact capacity.

How does the 12Gb/s SAS interface affect real-world throughput in a 10K RPM drive?

The 12Gb/s SAS link provides a maximum theoretical bandwidth of 12Gb/s, but sustained transfer rates are limited by the 10000 RPM mechanics and will be lower than the interface ceiling.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.