DELL
DELL 400-APBF 480GB 2.5" SATA internal hard drive
A 480GB 2.5-inch SATA solid-state drive with hot-swap capability for server storage upgrades
- PackagingBare Drive
- InterfaceSATA
- Capacity480GB
- Average Latency6Gb/s
- Form Factor2.5"
- 480 GB capacity stores large workloads
- 5 inch form factor fits standard drive bays
- SATA 6 Gb/s interface delivers fast data transfer
- Hot-swap tray enables drive changes without shutdown
- Genuine Dell part 400-APBF ensures system compatibility
Dell 400-APBF 480GB SATA SSD
The Dell 400-APBF is a 480GB solid-state drive built for 2.5-inch SATA hot-swap bays. It uses a SATA 6Gb/s interface and ships as a bare drive without a retail tray. The part number 400-APBF identifies it as a Dell original component for compatible servers or storage arrays.
Suits servers with 2.5-inch hot-swap SATA trays
This drive fits systems that accept 2.5-inch SATA hot-swap devices and need 480GB of solid-state capacity. It is not for builds limited to 3.5-inch bays, for setups that cannot hot-swap, or for buyers who require a larger capacity than 480GB.
SATA 6Gb/s interface decides compatibility
The drive connects through a SATA 6Gb/s link, so the host must provide a matching SATA port and hot-swap backplane. If the system uses a different interface or lacks hot-swap support, the drive will not function as intended.
Puncte forte
- 480 GB capacity stores large workloads
- 5 inch form factor fits standard drive bays
- SATA 6 Gb/s interface delivers fast data transfer
- Hot-swap tray enables drive changes without shutdown
- Genuine Dell part 400-APBF ensures system compatibility
Specificații
| Brand | Dell |
|---|---|
| Model | 400-APBF |
| Packaging | Bare Drive |
| Interface | SATA |
| Capacity | 480GB |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Întrebări despre acest articol
What host connector and bay size does my system need for the 2.5" SATA 400-APBF?
The drive plugs into a standard SATA data and power port and fits any 2.5" drive bay or hot-swap tray that accepts a 2.5" SATA SSD.
Will the 6 Gb/s SATA interface on the 400-APBF work with my older 3 Gb/s SATA controller?
Yes, the SATA 6 Gb/s interface is backward compatible and will operate at the 3 Gb/s link speed of the older controller.
How can I confirm the 480 GB 400-APBF is running at the rated 6 Gb/s link speed after installation?
Check the negotiated link speed in your BIOS, UEFI or OS disk utility — it should report a 6 Gb/s SATA connection for the drive.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
