DELL
DELL 400-ATII 300GB 2.5" SAS 15K 12Gb/s internal hard drive
300 GB enterprise SAS drive spins at 15000 RPM with 12 Gb/s transfer rate in a 2.5 inch hot-swap form factor
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity300GB
- RPM15000 RPM
- Average Latency6Gb/s
- UsageFor Enterprise Storage
- 300GB capacity stores large enterprise datasets
- 15000 RPM spindle delivers fast data access
- SAS 12Gb/s interface enables high-throughput transfers
- 5-inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
300 GB 15 000 RPM SAS enterprise drive
This 300 GB hard drive uses a 2.5 inch form factor and spins at 15 000 RPM. It connects through a SAS interface with a 12 Gb/s transfer rate. The drive is supplied as a bare unit with hot-swap capability for enterprise storage arrays.
Ideal for high-throughput transactional workloads
The 15 000 RPM spindle suits databases and OLTP systems that demand low latency and sustained IOPS. It is not for users who need larger capacity per spindle or who prefer the lower power draw of solid-state storage.
12 Gb/s SAS interface determines host compatibility
The drive requires a backplane or controller that supports 12 Gb/s SAS signalling. If the host only negotiates at 6 Gb/s the drive will operate at the lower speed but the full transfer rate will not be available.
Puncte forte
- 300GB capacity stores large enterprise datasets
- 15000 RPM spindle delivers fast data access
- SAS 12Gb/s interface enables high-throughput transfers
- 5-inch form factor fits dense server bays
- Hot-swap tray allows drive replacement without downtime
Specificații
| Brand | Dell |
|---|---|
| Model | 400-ATII |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 300GB |
| RPM | 15000 RPM |
| Average Latency | 6Gb/s |
| Usage | For Enterprise Storage |
| Form Factor | 2.5" |
Întrebări despre acest articol
Do I need a SAS controller or backplane that supports 12Gb/s to use the 400-ATII?
Yes, the drive uses a SAS interface with a 12Gb/s transfer rate, so the host controller or backplane must support SAS at that speed.
Will the 400-ATII work in a server that only has 6Gb/s SAS backplanes?
The drive is SAS-compatible and will negotiate down to 6Gb/s on an older backplane, though maximum throughput will be limited to that speed.
How can I confirm the 400-ATII is running at 15000 RPM after installation?
Check the drive's reported rotational speed in the RAID controller BIOS, OS disk utilities, or Dell OpenManage; it should show 15000 RPM.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
Iomega Corp Z250ATAPI BLACK 250MB ZIP backup drive
- 250MB
- 2941RPM
DELL 7T0DW 600GB 2.5" SAS 10000 RPM laptop hard drive
- Serial Attached SCS…
- 10000 RPM
Seagate ST500LT015 500GB 5400 RPM 16MB Cache SATA 6.0Gb/s 2.5" 7mm laptop hard drive
- 500GB
- 5400 RPM



