DELL
DELL HHRYF 8TB 3.5" SAS 7200 RPM internal hard drive
8 TB SAS hard drive spins at 7200 RPM with a 12 Gb/s transfer rate and hot-swap tray
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity8TB
- RPM7200 RPM
- Average Latency6Gb/s
- Form Factor3.5"
- 8 TB capacity stores large datasets
- 5 inch form factor fits standard drive bays
- SAS interface delivers 12 Gb/s transfer rate
- 7200 RPM spindle speed provides 7.2 K performance
- Hot-swap tray enables drive changes without downtime
Dell HHRYF 8TB Nearline SAS
The Dell HHRYF is an 8TB 3.5 inch Nearline SAS hard drive spinning at 7200 RPM. It connects through a 12Gb/s interface and ships as a bare drive with a hot-swap tray. This unit is built for desktop internal storage bays that accept 3.5 inch SAS devices.
Servers needing high-capacity nearline storage
The drive suits servers and workstations that require 8TB of nearline capacity on a 12Gb/s SAS backplane. Systems that only support 6Gb/s SAS links will not reach the rated transfer rate. Buyers who need a different capacity or a non-hot-swap form factor should consider other models.
12Gb/s SAS interface speed
The single specification that decides compatibility is the 12Gb/s SAS interface. The host controller and backplane must support this transfer rate to utilise the drive’s full performance. If the system is limited to 6Gb/s, the drive will still function but at the lower speed.
Puncte forte
- 8 TB capacity stores large datasets
- 5 inch form factor fits standard drive bays
- SAS interface delivers 12 Gb/s transfer rate
- 7200 RPM spindle speed provides 7.2 K performance
- Hot-swap tray enables drive changes without downtime
Specificații
| Brand | Dell |
|---|---|
| Model | HHRYF |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 3.5" |
Întrebări despre acest articol
How do I confirm the 8TB SAS drive is spinning at 7200 RPM after installation?
The drive should report 7200 RPM in the system BIOS or RAID controller utility, and SMART data will show the correct rotational speed.
What comes with the bare HHRYF drive and what must I source separately?
The drive ships as a bare 3.5" unit without a hot-swap tray, SAS cable, or mounting screws; those items must be purchased separately.
Which interface speed should I select for the Dell HHRYF — 6Gb/s or 12Gb/s?
The drive supports 12Gb/s Nearline SAS; choose a 12Gb/s backplane or controller to use the full transfer rate.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
