Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
2.5 inch SAS hard drive in black caddy

DELL

DELL HUC101414CSS300 146GB 10000RPM 2.5" SAS internal hard drive with caddy

SKU CH-WETC-V3MYT

146 GB 2.5" SAS drive spins at 10000 RPM with 16 MB cache and ships with a black caddy

  • 146 GB capacity stores critical enterprise data
  • 10,000 RPM spindle delivers fast transactional throughput
  • 3 Gb/s SAS interface integrates with existing controller infrastructure
  • 16 MB buffer smooths burst I/O workloads
  • Supplied 2.5-inch caddy enables direct hot-swap bay installation

Dell 146GB 10000RPM SAS drive

This Dell enterprise hard drive delivers 146GB of storage on a 2.5-inch SAS 3Gb/s interface spinning at 10000RPM with a 16MB buffer. It ships new with a black series caddy for direct installation in compatible drive bays. The drive suits servers or workstations that require a 3Gb/s SAS connection and a small-form-factor mechanical disk.

Suits SAS-only bays needing 146GB at 10K RPM

Administrators replacing a failed 146GB 10000RPM SAS drive in a Dell array will find a direct match with the included caddy. Systems that demand a 6Gb/s or 12Gb/s SAS link, larger capacities, or solid-state response times will not be served by this model.

Interface is 2.5-inch SAS at 3Gb/s

The single specification that decides fitment is the 2.5-inch SAS 3Gb/s interface; the host backplane or controller must support that exact link speed and physical connector. Without a matching SAS 3Gb/s port the drive cannot operate.

Puncte forte

  • 146 GB capacity stores critical enterprise data
  • 10,000 RPM spindle delivers fast transactional throughput
  • 3 Gb/s SAS interface integrates with existing controller infrastructure
  • 16 MB buffer smooths burst I/O workloads
  • Supplied 2.5-inch caddy enables direct hot-swap bay installation

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

How do I install the Dell HUC101414CSS300 2.5" SAS drive with the included Black Series caddy?

Slide the 2.5" SAS drive into the Black Series caddy until the connector seats firmly, then insert the assembly into a 2.5" SAS bay and secure it with the chassis screws; the step often missed is fully seating the SAS connector before tightening the caddy.

What maintenance or replacement will the HUC101414CSS300 need later?

The 10000RPM mechanical drive will eventually require replacement when bearing wear or media errors appear; no user-serviceable parts exist, so plan a full drive swap once SMART attributes signal degradation.

What limit appears first on the 146GB 10K SAS 3Gb/s drive under sustained use?

The 3Gb/s SAS interface caps sustained throughput well below the 10000RPM media speed, so the interface bottleneck shows up before the 16MB cache or spindle can saturate.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.