DELL
DELL KXPGD 600GB 2.5" SAS 15K 12Gb/s internal hard drive
A 600GB 2.5" SAS hard drive spinning at 15000 RPM with a 12Gb/s interface and hot-swap tray
- InterfaceSAS 12Gb/s
- Capacity600GB
- RPM15000 RPM
- Form Factor2.5"
- High-speed 12 Gb/s SAS interface enables rapid data transfers
- 15 000 RPM spindle delivers quick access for demanding workloads
- 600 GB capacity provides ample space for critical applications
- 5-inch form factor fits dense server and storage bays
- Hot-swap tray allows drive replacement without system downtime
Dell KXPGD 600GB 15K SAS Drive
This Dell KXPGD is a 2.5-inch internal hard drive built for enterprise servers and storage arrays. It delivers 600GB of capacity on a 12Gb/s SAS interface with a 15000 RPM spindle speed. The hot-swap tray design allows for quick replacement in supported bays. It is supplied new in original or OEM packaging.
Suits high-transaction workloads needing low latency
The 15K rotational speed targets databases, virtualisation hosts and mail servers where random I/O response matters most. Systems limited to slower spindle speeds or lower transfer rates will not realise the same throughput. Buyers needing larger single-drive capacities should consider alternative models.
12Gb/s SAS interface dictates controller
The drive requires a backplane or host bus adapter that supports 12Gb/s SAS signalling to operate at rated performance. Older 6Gb/s controllers will negotiate down to their maximum link speed. Verify your chassis and controller documentation before purchase.
Puncte forte
- High-speed 12 Gb/s SAS interface enables rapid data transfers
- 15 000 RPM spindle delivers quick access for demanding workloads
- 600 GB capacity provides ample space for critical applications
- 5-inch form factor fits dense server and storage bays
- Hot-swap tray allows drive replacement without system downtime
Specificații
| Brand | Dell |
|---|---|
| Model | KXPGD |
| Interface | SAS 12Gb/s |
| Capacity | 600GB |
| RPM | 15000 RPM |
| Form Factor | 2.5" |
Întrebări despre acest articol
How do I install the 2.5" SAS drive in a hot-swap tray without bending the connector?
Slide the drive into the carrier until the SAS connector seats firmly, then lock the tray lever; forcing it at an angle bends the pins.
What maintenance will the 15000 RPM 600GB drive need over its life?
No scheduled maintenance is required; monitor SMART attributes and replace the unit if reallocated sectors or seek errors appear.
At what point does the 12Gb/s SAS interface become the bottleneck during sustained writes?
Sequential throughput caps near the 12Gb/s link limit, so sustained transfers cannot exceed that bandwidth.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



