Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 2U rack server with twelve 3.5-inch drive bays visible at front

DELL

DELL PowerEdge R540 12 Bay 3.5" 2U rack server 2x Xeon Silver 4114 2.2GHz 10 Core 16GB DDR4 12x 4TB SAS H730P

SKU CH-B4PY-XFXNG

2U rack server with two 10-core Xeon Silver 4114 processors at 2.2 GHz, 16 GB DDR4, PERC H730P controller, and twelve 4 TB 7.2 K SAS drives

  • Dual 10-core Xeon 4114 CPUs at 2.2 GHz turbo to 3.0 GHz for strong multi-thread throughput
  • 12-bay 3.5" chassis filled with 12× 4 TB 7.2K SAS drives for high-capacity storage
  • PERC H730P controller with 2 GB cache enables RAID 0/1/5/6/10/50/60 and pass-through
  • 16 GB DDR4-2400 ECC registered memory protects data integrity in critical workloads
  • iDRAC9 Express plus dual 1 GbE ports and redundant 750 W platinum supplies simplify remote management

Dell PowerEdge R540 12-bay 2U rack server

The Dell PowerEdge R540 is a 2U rack server equipped with two Intel Xeon Silver 4114 processors, each running at 2.2GHz with 10 cores and a 3.0GHz turbo frequency. It includes 16GB of DDR4-2400 ECC registered memory and a PERC H730P storage controller with 2GB cache supporting RAID 0, 1, 5, 6, 10, 50 and 60. Twelve 3.5-inch 4TB SAS hard drives spinning at 7.2K RPM provide the primary storage. Dual integrated Gigabit Ethernet ports and iDRAC 9 Express remote management are standard, powered by two 750W platinum power supplies.

Suited for storage-heavy workloads needing dense

This server suits organisations running virtualisation clusters, software-defined storage or database applications that benefit from twelve large-capacity drive bays and hardware RAID. The dual 10-core processors handle multi-threaded workloads while the H730P controller manages array redundancy. Buyers who need faster flash storage, greater memory capacity or additional PCIe expansion slots should look at other configurations. The fixed 16GB memory and lack of included front bezel or ready rails may also limit immediate deployment in some racks.

12x 4TB SAS drives on H730P controller defines

The single specification that decides fit is the storage subsystem: twelve 4TB 7.2K SAS drives connected to a PERC H730P controller with battery-backed cache. This combination delivers high raw capacity with hardware RAID flexibility for bulk data, backup targets or archival workloads. If the workload demands lower latency, higher IOPS or a different drive count, this specific drive-and-controller pairing will not match the requirement.

Puncte forte

  • Dual 10-core Xeon 4114 CPUs at 2.2 GHz turbo to 3.0 GHz for strong multi-thread throughput
  • 12-bay 3.5" chassis filled with 12× 4 TB 7.2K SAS drives for high-capacity storage
  • PERC H730P controller with 2 GB cache enables RAID 0/1/5/6/10/50/60 and pass-through
  • 16 GB DDR4-2400 ECC registered memory protects data integrity in critical workloads
  • iDRAC9 Express plus dual 1 GbE ports and redundant 750 W platinum supplies simplify remote management

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What memory type must I already have to populate the remaining DDR4 slots on this R540?

The server uses DDR4-2400 ECC Registered DIMMs; the two installed 8 GB modules are that type, so any added sticks must match DDR4 ECC Registered specification.

Will the PERC H730P controller recognise my older SATA hard drives in the 3.5-inch bays?

Yes, the H730P supports both SAS and SATA drives, so existing SATA disks can be used in the twelve 3.5-inch bays alongside the supplied 4 TB SAS drives.

How can I confirm the iDRAC9 Express remote management is working after initial setup?

Connect the iDRAC network port, browse to its IP address, and log in; a successful login and hardware inventory view confirms iDRAC9 Express is operational.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.