Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Square copper-base heatsink with three heatpipes and aluminium fins, 64 mm tall

Dynatron

Dynatron R8 CPU cooler LGA 2011 64 mm 3 heatpipes

SKU CH-3850-8PY64 MPN R8

Passive copper-base heatsink with three heatpipes and aluminium fins, 64 mm tall for Intel LGA 2011 square-mount CPUs

  • TypeHeatsinks only
  • CPU Socket CompatibilityIntel LGA 2011 (Square Type, 80mm x 80mm Mounting Pitch)
  • Heatsink MaterialCopper Base with Aluminum Stacked Fin with 3 Heatpipes
  • Fan Mounting Types to HeatsinkN/A
  • Max CPU Cooler Height64 mm
  • Heatsink Dimensions90.0 x 90.0 x 64.0 mm (Overall)
  • Copper base conducts heat efficiently from the CPU
  • Three heatpipes transfer thermal energy across the heatsink
  • Aluminium stacked fins increase surface area for passive dissipation
  • 64 mm height fits within 1U rack-mount enclosures
  • 80 mm square mounting pitch matches Intel LGA 2011 socket specification

Passive heatsink for LGA 2011

The Dynatron R8 is a fanless copper-base heatsink with three heatpipes and aluminium stacked fins. It fits Intel LGA 2011 sockets using the square 80 mm mounting pitch. The unit is designed for Sandy Bridge EP and EX processors in servers or workstations where silent operation or ducted airflow is required.

64 mm height limit

Overall dimensions are 90.0 x 90.0 x 64.0 mm, making the cooler 64 mm tall. This low profile allows installation in 1U and other space-constrained chassis that cannot accommodate taller tower coolers. Verify your case or rack clearance before ordering.

Sustained load without a fan

With no integrated fan, thermal performance depends entirely on system airflow directed through the fin stack. Under continuous load the heatsink relies on case or duct fans to move air across the aluminium fins. In enclosures with weak or misdirected airflow temperatures will rise steadily, so this cooler suits builds with strong, managed airflow paths.

Puncte forte

  • Copper base conducts heat efficiently from the CPU
  • Three heatpipes transfer thermal energy across the heatsink
  • Aluminium stacked fins increase surface area for passive dissipation
  • 64 mm height fits within 1U rack-mount enclosures
  • 80 mm square mounting pitch matches Intel LGA 2011 socket specification

Specificații

BrandDynatron
ModelR8
TypeHeatsinks only
CPU Socket CompatibilityIntel LGA 2011 (Square Type, 80mm x 80mm Mounting Pitch)
Heatsink MaterialCopper Base with Aluminum Stacked Fin with 3 Heatpipes
Fan Mounting Types to HeatsinkN/A
Max CPU Cooler Height64 mm
Heatsink Dimensions90.0 x 90.0 x 64.0 mm (Overall)
Weight1.08 lbs.
FeaturesCPU Support: Intel Sandy Bridge EP / EX Processors
Greutate la expediere0.64 kg
Dimensiunile coletului112 × 109 × 91 mm

Întrebări despre acest articol

How does the 64 mm height affect case compatibility?

At 64 mm tall the cooler fits in most 1U and low-profile chassis where taller towers cannot be installed.

What does the 80 mm square mounting pitch mean for installation?

It matches the standard LGA 2011 square ILM hole pattern so the cooler bolts directly onto the socket without an adapter bracket.

Will the 90 mm footprint clear tall memory modules on a server board?

The 90 mm square base leaves the DIMM slots exposed so standard-height registered DIMMs install without interference.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.