Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Compact boxed kit with twenty steel needles, copper brush and tweezers

EILKBLA 22PCS 3D Printer Nozzle Cleaning Kit 20x 0.4mm Needles

SKU CH-WY37-FK2RX

A 22-piece kit with 20 stainless-steel 0.4 mm needles, a copper wire brush and a precision tweezer clears clogged nozzles on any 3D printer

  • Type22PCS 3D Printer Cleaning Kit
  • Clear stubborn clogs with 20 precision 0.4mm stainless steel needles
  • Remove rust and residue using the multifunctional copper wire brush
  • Pick up debris precisely with the included precision tweezer
  • Maintain all major 3D printer models with universal compatibility
  • Heat nozzle to 200°C for effective cleaning procedure

22-piece 3D printer nozzle cleaning kit

This kit contains twenty 0.4 mm stainless steel needles, a precision tweezer and a copper wire brush. It is designed for hobbyists and professionals who need to clear filament clogs and keep printer nozzles flowing smoothly. The tools work together to remove debris from nozzles, hot beds and other tight spaces. Every component fits standard 3D printer hardware.

Thermals, noise and power draw

The cleaning process requires heating the nozzle to 200 °C before inserting a needle. No electrical power is consumed by the kit itself and the tools produce no noise during use. Heat from the printer softens residue so the brush and needles can remove it without forcing. No active cooling or power supply is involved.

0.4 mm needle diameter

Each of the twenty needles measures 0.4 mm in diameter, matching the most common nozzle bore size. Printers with smaller or larger nozzle openings will not be serviced by these pins. Buyers who need multiple diameters for different nozzle sizes should look for a kit that includes them.

Puncte forte

  • Clear stubborn clogs with 20 precision 0.4mm stainless steel needles
  • Remove rust and residue using the multifunctional copper wire brush
  • Pick up debris precisely with the included precision tweezer
  • Maintain all major 3D printer models with universal compatibility
  • Heat nozzle to 200°C for effective cleaning procedure

Specificații

BrandEILKBLA
Model22PCS 3D Printer Cleaning Kit
Part Number22PCS 3D Printer Cleaning Kit
Type22PCS 3D Printer Cleaning Kit

Întrebări despre acest articol

How do I use the 0.4mm needles without damaging the nozzle?

Heat the nozzle to 200°C or above, then gently insert and remove a stainless steel needle through the tip. Repeat until filament flows smoothly. The needles are designed not to damage sensitive components.

Which parts of this kit wear out and need replacing?

The 20 stainless steel needles can bend or break with repeated use. The copper wire brush bristles will wear down over time. The precision tweezer lasts longer but may eventually lose grip alignment.

What is the first limitation I will hit during a long cleaning session?

The nozzle cools below 200°C while you work, hardening the debris again. You must reheat it repeatedly to keep the 0.4mm needles effective.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.