Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 204-pin DDR3 SODIMM module with black chips

Elpida Memory, Inc

Elpida EBJ21UE8BAU0-AE-E 2GB DDR3-1066 CL7 204-pin SODIMM 1.5V

SKU CH-B5JN-6GCPF

2GB DDR3 laptop module running at 1066 MHz with CL7 latency and 1.5V operation

  • Capacity2GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCNo
  • 2GB capacity fits DDR3 laptop upgrade slots
  • DDR3-1066 speed rated PC3-8500 for compatible systems
  • CL7 latency supports responsive memory access
  • 5V operation matches standard DDR3 voltage
  • 204-pin SODIMM form factor installs in DDR3 laptop sockets

2 GB DDR3-1066 SO-DIMM for laptops

This 204-pin module delivers 2 GB of DDR3 memory rated at PC3-8500 with a CAS latency of CL7. It is built for notebooks and compact systems that accept unbuffered, non-ECC DDR3 SODIMMs at 1.5 V. The 2Rx8 organisation with 16 chips suits upgrades where a single low-density stick is required.

Thermals, noise and power draw

Operating at the standard 1.50 V, the module draws only the power defined by the DDR3-1066 specification. With no active cooling on the stick itself, it adds no audible noise and relies on the laptop's existing airflow. Typical idle and load power stays within the SO-DIMM form-factor envelope.

What the bundle changes

The module ships alone without additional brackets, software or installation tools. Its 16-chip, 128x8 layout means the density is fixed at 2 GB, so builders needing more capacity must add a second compatible slot. No firmware or driver updates are included or required.

Puncte forte

  • 2GB capacity fits DDR3 laptop upgrade slots
  • DDR3-1066 speed rated PC3-8500 for compatible systems
  • CL7 latency supports responsive memory access
  • 5V operation matches standard DDR3 voltage
  • 204-pin SODIMM form factor installs in DDR3 laptop sockets

Specificații

BrandElpida
ModelEBJ21UE8BAU0-AE-E
Capacity2GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered

Întrebări despre acest articol

How do I install this 204-pin DDR3 SODIMM in my laptop, and what step do people often miss?

Power off the laptop, remove the battery if possible, open the memory access panel, align the notch on the 204-pin module with the slot key, press firmly at both ends until the retention clips click, then reassemble. The step often missed is confirming both clips lock audibly.

What maintenance or replacement will this 2GB DDR3-1066 CL7 module need later?

No scheduled maintenance is required. If the system becomes unstable, test with a memory diagnostic; replace the module only if errors persist or capacity needs increase beyond 2GB.

What limit appears first when this 1.5V DDR3 SODIMM runs under sustained load?

The thermal limit of the 16-chip 2Rx8 layout typically appears first; prolonged heavy workloads can raise chip temperatures enough to trigger throttling or instability before bandwidth or latency limits are reached.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.