Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with five rear ports and internal headers, full and low-profile brackets included

EN-Labs

EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card

SKU CH-PD2Y-HTVF1

Adds five USB 3.2 10 Gbps ports via a PCIe x4 slot with ASMedia and VIA controllers, plus internal headers for front-panel connectivity

  • Typeno
  • Package Contents12CM Case fan,screws bag
  • Five rear ports deliver up to 10Gbps each
  • 16Gbps aggregate bandwidth handles multiple devices simultaneously
  • ASM3142 and VL822 chipsets provide stable, reliable operation
  • Works in x4, x8 and x16 PCIe 3.0 slots
  • Driver-free on Windows 8, 10 and 11

Five-port PCIe 3.0 x4 USB 3.2 10Gbps card

This EN-Labs add-on card converts a PCIe 3.0 x4 slot into five USB 3.2 Gen 2 ports. It provides three Type-A and two Type-C connectors plus a Type-E A-key header and a 19-pin internal header for front-panel access. The board uses ASMedia ASM3142 and VL822 controllers and requires no external power connector. Driver-free operation is supported on Windows 8, 10 and 11.

Bandwidth limited to 16Gbps aggregate

The PCIe 3.0 x4 host link caps total throughput at 16Gbps while each individual port can reach 10Gbps. Simultaneous high-speed transfers on multiple ports will share the upstream bandwidth. The card fits x4, x8 and x16 slots but will not function in an x1 slot. Compliance with the XHCI 1.0 specification ensures broad OS compatibility.

Replaces single-port or 5Gbps USB cards

Builders upgrading from a single 10Gbps port or older 5Gbps expansion cards gain five concurrent 10Gbps ports and front-panel headers in one slot. The jump is worthwhile when multiple high-speed peripherals or front-panel Type-C ports are needed. Systems with only x1 slots available cannot use this card.

Puncte forte

  • Five rear ports deliver up to 10Gbps each
  • 16Gbps aggregate bandwidth handles multiple devices simultaneously
  • ASM3142 and VL822 chipsets provide stable, reliable operation
  • Works in x4, x8 and x16 PCIe 3.0 slots
  • Driver-free on Windows 8, 10 and 11

Specificații

BrandEN-LABS
Model11-001-366
Typeno
Package Contents12CM Case fan,screws bag

Întrebări despre acest articol

How do I decide between the rear Type-C, rear Type-A, internal Type-E and internal 19-pin headers on this 5-port card?

The card provides one rear Type-C, one rear Type-A, one internal Type-E A-Key and one internal 19-pin USB 3.0 header — four connectors for five logical ports. Choose the rear ports for external drives or docks, the Type-E header for a front-panel Type-C port, and the 19-pin header for classic front-panel Type-A ports.

What does the 10 Gbps per-port rating actually deliver when I plug in a fast SSD?

Each port can signal at up to 10 Gbps, but the PCIe 3.0 x4 host link caps aggregate throughput at 16 Gbps, so simultaneous transfers on multiple ports will share that ceiling and real-world SSD speeds will be lower than the single-port maximum.

Which PCIe slot widths work with the x4 interface on this card?

The card fits x4, x8 and x16 slots electrically wired for PCIe 3.0; it will not function in an x1 slot because the lane count is insufficient for the ASMedia ASM3142 and VL822 controllers.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.