Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with four blue USB 3.0 ports, two Type-A on a metal bracket and one 20-pin internal header, Molex power connector

EN-Labs

EN-Labs PCE4USB-RD1 PCIe USB 3.0 expansion card 4-port 20-pin internal Molex

SKU CH-FCYG-TRY4G

Adds four USB 3.0 ports — two external Type-A and one 20-pin internal header — via a PCIe x1 slot with VIA VL805 chipset and Molex power

  • TypePCI Express to USB Card
  • External USB Ports4-port USB 3.0
  • SpecificationsBus Type:PCI ExpressType Standard:Profile (LP bracket incl.)
  • FeaturesAdd 4 USB 3.0 ports(2 x Type A + 20 Pin Interna) through a P
  • Package Contents1 x PCIe USB 3.0 PCI express card
  • Add four USB 3.0 ports via a single PCIe x1 slot
  • Two external USB 3.0 Type-A ports for rear-panel devices
  • One internal 20-pin header drives two front-panel USB 3.0 ports
  • VIA VL805 chipset delivers 5 Gbps per port with USB 2.0/1.1 backwards compatibility
  • Molex 4-pin power and per-port over-current protection safeguard connected devices

EN-Labs PCE4USB-RD1 PCIe USB 3.0 card

This EN-Labs add-on card uses a VIA VL805 chipset to provide four USB 3.0 ports through a single PCI Express x1 slot. Two Type-A ports sit on the rear bracket while one internal 20-pin header feeds two front-panel ports. A Molex 4-pin connector supplies auxiliary power and each port carries independent over-current protection.

Windows 8 and 10 desktops needing extra front

The card is plug-and-play on Windows 8 and 10, while Windows 7, 8, XP and Vista require a driver install. The supplier notes that Linux is not supported, so builders targeting that OS should choose a different controller. Both full-height and low-profile brackets are included for standard ATX and slim cases.

VIA VL805 chipset with no Linux driver support

The VL805 controller delivers 5 Gbps per port and is backward compatible with USB 2.0 and 1.1 devices. Because the manufacturer explicitly states that Linux is not supported, the chipset choice is the single specification that determines whether this card fits the intended operating system.

Puncte forte

  • Add four USB 3.0 ports via a single PCIe x1 slot
  • Two external USB 3.0 Type-A ports for rear-panel devices
  • One internal 20-pin header drives two front-panel USB 3.0 ports
  • VIA VL805 chipset delivers 5 Gbps per port with USB 2.0/1.1 backwards compatibility
  • Molex 4-pin power and per-port over-current protection safeguard connected devices

Specificații

BrandEn-Labs
ModelPCE4USB-RD1
TypePCI Express to USB Card
External USB Ports4-port USB 3.0
SpecificationsBus Type:PCI ExpressType Standard:Profile (LP bracket incl.) Chipset:VIA VL805 Interface: USB 3.0 Port Type and Rate :USB 3.0 - 5 Gbit/s Connector Type(s): 1 - PCI Express x1 Male External Ports: 2 - USB Type-A (9 pin) USB 3.0 Female Internal Ports : 2 x US 3.0 Internal Ports (20 pin connector) front panel for floppy bay Internal Ports : 1 - Molex 4 pin Plug
FeaturesAdd 4 USB 3.0 ports(2 x Type A + 20 Pin Interna) through a PCI Express slotCompatible with PCI-Express 2.0 stardardCompatible with Super Speed USB 3.0 5Gbps stardard,backwards to USB 2.0 and USB 1.1 Compatible with XHCI specification 1.0 Chip set : VIA VL805 Maximum transfer speed : 5Gbps Power by PCIe slot,no extra power adapter is needed, but still built-in power-enhanced Molex 4 pin LP4 male InterfaceSupports PCIe 1x, 4x, 8x, 16x SlotSupport Windows XP / 2003 / Win7 / Win8 / Vista / Linux
Package Contents1 x PCIe USB 3.0 PCI express card

Întrebări despre acest articol

What slot and power connector must the motherboard and PSU provide for the EN-Labs PCE4USB-RD1 to function?

The card requires a free PCI Express x1 slot (also compatible with x4, x8 or x16) and a spare Molex 4-pin power connector from the power supply.

Will USB 2.0 and USB 1.1 devices connected to the card's four ports operate at their original speeds?

Yes, the VIA VL805 chipset is backwards compatible with USB 2.0 and USB 1.1, so older peripherals will work at their native rates.

After installing the card in Windows 10, how can I verify each of the four ports is running at USB 3.0 5 Gbps?

Open Device Manager, expand Universal Serial Bus controllers, confirm the VIA VL805 host controller appears without errors, then attach a USB 3.0 flash drive to each port and check that the transfer speed reaches the 5 Gbps rating.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.