Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black standalone duplicator with nine SATA slots and a 16 x 2 LCD display

EZ Dupe, Inc.

EZ Dupe H09HSATB 1-to-9 SATA duplicator

SKU CH-X2X2-WCXJH

Standalone duplicator copies up to nine SATA 3.5" or 2.5" drives at 150 MB/s with four copy and four erase modes including DoD 5220.22 standards

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 9

Target 1 to 9

Data Transfer Rate 150MB/s

Versiunile tăiate există, dar nu sunt disponibile aici.

  • Copies nine drives simultaneously at 150 MB/s each
  • Four copy modes cover quick, full, partition and percentage duplication
  • Four erase modes include DoD 3-pass and 7-pass sanitisation
  • Standalone operation needs no host PC or software
  • 16×2 LCD panel shows status for every slot

Standalone SATA Duplicator for 9 Drives

The EZ Dupe H09HSATB is a standalone duplicator that copies up to nine SATA 3.5" or 2.5" drives simultaneously at 150MB/s. It operates without a host computer, using an Athena controller with 128M buffer and a 16 x 2 LCD for local control. Power is drawn from 115-230 V AC at 50/60 Hz.

IT Teams and Data-Centre Staff Needing Secure Bulk

Suits organisations that must clone or sanitise multiple SATA drives quickly and without software exposure. The unit offers four copy modes including Quick Copy and Percentage Copy, plus four erase modes up to DoD 7-pass 5220.22-M ECE standard. Buyers needing interfaces other than SATA, or who require network-attached or software-managed operation, should look at a different device.

Nine-Target SATA Slot Capacity Decides Fit

The single specification that determines suitability is the nine-target slot count combined with the SATA connector. If the workflow demands duplicating more than nine drives at once, or drives using a different interface, this model will not meet the requirement.

Puncte forte

  • Copies nine drives simultaneously at 150 MB/s each
  • Four copy modes cover quick, full, partition and percentage duplication
  • Four erase modes include DoD 3-pass and 7-pass sanitisation
  • Standalone operation needs no host PC or software
  • 16×2 LCD panel shows status for every slot

Specificații

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH09HSATB
Part NumberH09HSATB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate150MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What does the SATA interface limit the copy speed to on this duplicator?

The SATA connection caps each of the nine target slots at 150 MB/s, which equals 9 GB per minute in practice.

What drive sizes fit the nine target slots without an adapter?

Both 3.5-inch and 2.5-inch SATA drives slide directly into the slot-load bays; no adapter is required for either form factor.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.