Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small 40x40x28mm black axial case fan with short cable

Fans

Fans 109P0424H309Size 40x40x28mm 24V 8700RPM 11.3CFM 37dBA case fan

SKU CH-GPMY-CQ2RC MPN 109P0424H309Size

Compact 40×40×28 mm case fan runs at 8700 RPM, delivers 11.3 CFM airflow at 37 dBA on 24 V power

  • Compact 40x40x28 mm footprint fits tight builds
  • 24 V double-ball bearing runs 8700 RPM for 11.3 CFM airflow
  • 37 dBA noise level keeps operation quiet
  • Original Sanyo Denki manufacture ensures reliable quality
  • 5 cm lead simplifies wiring in confined spaces

Compact 40 mm Axial Fan

The 40 mm by 40 mm by 28 mm axial fan runs on 24 V DC and draws 0.095 A. It is built for equipment cooling in tight enclosures where a small footprint is required. The double ball bearing supports continuous operation in industrial and embedded systems.

Thermals and Acoustics

At 8700 RPM the fan moves 11.3 CFM while producing 37 dBA of noise. The 5 cm lead keeps cable routing simple inside dense chassis layouts. Power draw stays low at 24 V for efficient thermal management.

Integration Notes

The 40 mm square frame fits standard 40 mm mounting holes without adapters. Builders needing higher airflow or lower noise at this voltage should evaluate larger frame sizes. The short lead may require an extension for motherboard headers positioned far from the intake.

Puncte forte

  • Compact 40x40x28 mm footprint fits tight builds
  • 24 V double-ball bearing runs 8700 RPM for 11.3 CFM airflow
  • 37 dBA noise level keeps operation quiet
  • Original Sanyo Denki manufacture ensures reliable quality
  • 5 cm lead simplifies wiring in confined spaces

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

How do I mount the 40 x 40 x 28 mm fan and what is the common wiring mistake?

Use four M3 screws through the 40 mm square frame; the 5 cm lead is short, so plan the cable route before securing the fan to avoid tension on the connector.

Which part will wear out first on the 109P0424H309Size and when should I replace it?

The double ball bearing is the only moving component; expect replacement when noise rises above the rated 37 dBA or speed drops below 8700 RPM.

At what point does the 24 V 0.095 A fan hit its thermal limit during continuous operation?

The motor is rated for 24 V at 0.095 A; sustained operation above that current or with restricted airflow will cause the winding temperature to reach its design limit first.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.