FANTOM DRIVES
FANTOM DRIVES HDD16000PCKIT 16TB 3.5" SATA internal hard drive
A 16TB 3.5" SATA internal hard drive spinning at 7200 RPM with 256MB cache, bundled with a USB 3.0 to SATA cable and cloning software for easy upgrades
- InterfaceSATA 6.0Gb/s
- Capacity16TB
- RPM7200 RPM
- 16 TB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers responsive data access
- 256 MB cache buffers bursts for smoother throughput
- SATA 6.0 Gb/s interface provides broad desktop compatibility
- Kit includes USB 3.0 to SATA cable and cloning software for easy migration
16TB SATA drive kit for desktop upgrades
This kit supplies a 16TB 3.5" SATA 6.0Gb/s hard drive spinning at 7200 RPM, a USB 3.0 to SATA cable and cloning software. It is aimed at desktop owners who need a single large-volume replacement or a fresh data drive without reinstalling their operating system.
16TB capacity with 256MB cache headroom
The 16TB capacity handles multi-terabyte media libraries, backups and archival workloads with room to spare. The 256MB cache absorbs burst write traffic, but sustained sequential throughput is limited by the 7200 RPM mechanism and the SATA 6.0Gb/s interface.
7200 RPM thermals and power profile
At 7200 RPM the drive generates typical mechanical heat and audible seek noise under load. Power draw follows standard 3.5" SATA patterns during active use and idle, requiring adequate case airflow but no special cooling provisions.
Puncte forte
- 16 TB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers responsive data access
- 256 MB cache buffers bursts for smoother throughput
- SATA 6.0 Gb/s interface provides broad desktop compatibility
- Kit includes USB 3.0 to SATA cable and cloning software for easy migration
Specificații
| Brand | MicroNet |
|---|---|
| Interface | SATA 6.0Gb/s |
| Capacity | 16TB |
| RPM | 7200 RPM |
| Greutate la expediere | 1.36 kg |
| Dimensiunile coletului | 235 × 231 × 51 mm |
Întrebări despre acest articol
Will this 16TB 7200 RPM SATA drive work in a desktop that only has SATA 3.0Gb/s ports?
Yes, the SATA 6.0Gb/s interface is backward compatible with 3.0Gb/s ports and will run at the slower link speed.
How can I verify the 256MB cache and 7200 RPM speed are active after installation?
Check the drive model ST16000NM001G in system information or SMART tools; they will report 7200 RPM and 256MB cache.
Does the kit include a SATA data cable and power adapter for internal mounting, or only the USB 3.0 to SATA cable?
The kit provides a USB 3.0 to SATA cable for cloning; a standard SATA data cable and power connection from your desktop power supply are required for internal install.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
