Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
White soft tubing kit with compression fittings, cutter and angled adapters

FormulaMod

FormulaMod Soft Tube Fitting Kit White 10x13mm

SKU CH-N40F-3898F

Includes three metres of 10x13mm white soft tubing, ten compression fittings, two 90-degree elbows, a mini male-to-male adapter and a tube cutter for G1/4-inch water-cooling loops

  • TypeCombo Kit
  • ColorWhite

Color White

  • Complete kit with tubing, fittings and cutter included
  • 10x13mm soft tubing fits G1/4" water-cooling ports
  • Ten straight compression fittings for secure connections
  • Two 90° angled fittings simplify tight routing
  • Mini male-to-male fitting joins components directly

Complete Soft-Tube Kit

This kit bundles three metres of 10x13mm white tubing, ten straight compression fittings, two 90° elbows, one mini male-to-male adapter and a dedicated cutter. Everything needed for a custom loop arrives in one box, so builders avoid sourcing parts separately. The white colour keeps the loop visually clean inside any chassis.

Capacity and Headroom

The 10x13mm bore handles typical single-loop flow rates without restriction, while the three one-metre tubes cover most mid-tower routing paths. Very large cases or dual-radiator layouts may require extra tubing length. Ten fittings support up to five components, so loops with more blocks will need additional connectors.

Bundled Cutter and Angled Fittings

The included tube cutter produces square, burr-free ends that seat cleanly in the compression collars, reducing leak risk during first fill. Two 90° elbows let the tubing make tight turns around motherboard heatsinks or GPU backplates without kinking. The mini M2M adapter joins two female ports directly, saving space in crowded reservoirs or pump tops.

Puncte forte

  • Complete kit with tubing, fittings and cutter included
  • 10x13mm soft tubing fits G1/4" water-cooling ports
  • Ten straight compression fittings for secure connections
  • Two 90° angled fittings simplify tight routing
  • Mini male-to-male fitting joins components directly

Specificații

TypeCombo Kit
ColorWhite

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the G1/4" threads on these fittings match the ports on my older water-blocks and radiators?

Yes — every fitting in the kit uses a standard G1/4" thread, which is the common size found on most water-cooling components from the past decade.

How can I confirm the compression fittings are sealed correctly once the loop is filled?

After filling, run the pump at low speed and inspect each of the ten compression joints; a properly seated fitting shows no moisture at the collar and the tube cannot be pulled out by hand.

What tubing, fittings and tools are included, and is anything else required to finish a loop?

The box contains three 1-metre lengths of 10x13 mm soft tube, ten straight compression fittings, two 90° fittings, one mini male-to-male adapter and a tube cutter; you will still need coolant, a pump, reservoir and radiators to complete the loop.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.