NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
GIGABYTE
Micro-ATX board with LGA 1151 socket, Intel B250 chipset, four DDR4 slots up to 64 GB, one PCIe 3.0 x16 slot, six SATA ports and an M.2 connector
The Gigabyte GA-B250M-D3H revision 1.0 is a micro ATX motherboard built on the Intel B250 chipset. It accepts LGA 1151 processors from the Core i7, i5, i3, Pentium and Celeron families. The board provides four 288-pin DDR4 slots, a single PCI Express 3.0 x16 slot, six SATA 6Gb/s ports, one SATA Express connector and one M.2 socket.
This board suits builders using 6th or 7th generation Intel CPUs who need a compact platform with dual-channel memory up to 64 GB. It is not compatible with 8th generation processors, so owners of those chips must choose a different platform. The single full-length PCIe slot limits multi-GPU configurations.
The memory standard lists DDR4 2400 and 2133 MHz, but 2400 MHz or XMP operation only activates when a 7th generation processor is installed. With a 6th generation CPU the board runs memory at 2133 MHz. This distinction decides whether the board meets your speed target.
| Brand | GIGABYTE |
|---|---|
| Model | GA-B250M-D3H (rev. 1.0) |
| CPU Socket Type | LGA 1151 |
| CPU Type | Core i7 / i5 / i3 / Pentium / Celeron (LGA1151) |
| Supported CPU Technologies | * Not Compatible with Intel 8th Gen CPUs |
| Chipset | Intel B250 |
| Number of Memory Slots | 4x288pin (DDR4) |
| Memory Standard | DDR4 2400*/ 2133 MHz/* To support 2400 MHz or XMP memory, you must install a 7th generation processor. |
| Maximum Memory Supported | 64GB |
| Channel Supported | Dual Channel |
| PCI Express 3.0 x16 | 1 x PCI Express x16 slot, running at x16 (PCIEX16)/* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot./1 x PCI Express x16 slot, running at x4 (PCIEX4)/(All of the PCI Express slots conform to PCI Express 3.0 standard.) |
| PCI Slots | 2 x PCI Slots |
| Serial ATA (SATA) | 6 x SATA 6Gb/s connectors/* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors. |
| SATA Express | 1 x SATA Express connector/* The SATA Express connector is not compatible with regular SATA devices. |
| M.2 | 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support) |
| Audio Chipset | Realtek ALC892 |
| Audio Channels | 2/4/5.1/7.1-channel |
| LAN Chipset | Intel GbE LAN chip |
| Max LAN Speed | 1Gbps |
| PS/2 | 1 x PS/2 keyboard/mouse port |
| Video Ports | 1 x D-Sub port/1 x DVI-D port |
| HDMI | 1 x HDMI |
| RJ45 | 1 x RJ45 |
| DisplayPort | 1 x DisplayPort |
| USB 3.1 | 4 x USB 3.1 Gen 1 ports |
| USB 1.1/2.0 | 2 x USB 2.0 |
| Audio Ports | 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In) |
| Onboard USB | 1 x USB 3.1 Gen 1 header/2 x USB 2.0/1.1 header |
| Other Connectors | 1 x 24-pin ATX main power connector/1 x 8-pin ATX 12V power connector/1 x CPU fan header/3 x system fan headers/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/1 x Trusted Platform Module (TPM) header/1 x serial port header/1 x parallel port header/1 x Clear CMOS jumper |
| Form Factor | Micro ATX |
| Power Pin | 24 Pin |
| Features | Multi-Graphics Technology/- Support for AMD Quad-GPU CrossFireX and 2-Way AMD CrossFire Technology//I/O Controller/- iTE I/O Controller Chip//Hardware Monitor/- Voltage detection/- Temperature detection/- Fan speed detection/- Overheating warning/- Fan fail warning/- Fan speed control/* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.//BIOS/- 2 x 64 Mbit flash/- Use of licensed AMI UEFI BIOS/- Support for DualBIOS/- PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0//Unique Features/- Support for APP Center/* Available applications |
The board uses the Micro-ATX form factor, so any chassis that accepts Micro-ATX or larger will fit; the four 288-pin DDR4 slots sit along the right edge and need standard DIMM height clearance.
The PCIEX16 slot runs at x16 electrically; the manual stresses inserting the card there first for best performance, yet many install it in the second x16-size slot that only runs at x4.
Both controllers are soldered onboard and need no user service; just clear dust from the rear I/O ports and the board surface periodically so heat can dissipate normally.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?