Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
HP 300Gb 10000Rpm Fiber Channel drive in hot-swap tray

HP

HP 404742-001 300Gb 10000Rpm Fiber Channel 2Gbit Dual Port 40Pin Hot Swap internal hard drive

SKU CH-PQN9-BSRT6

300 GB Fibre Channel drive spins at 10,000 RPM with dual ports and hot-swap tray

  • NAND Flash Memory TypeSLC
  • 300 Gb capacity stores enterprise workloads
  • 10 000 rpm spindle speeds up data access
  • Dual-port Fibre Channel provides redundant paths
  • 40-pin hot-swap tray enables tool-less replacement

300Gb Fibre Channel 10000Rpm drive

This HP 404742-001 is a 300Gb Fibre Channel hard drive spinning at 10000Rpm. It uses a dual-port 2Gbit interface and a 40-pin connector with a hot-swap tray. The drive is suited for legacy storage arrays or servers that require this specific interface and form factor.

40-pin hot-swap tray installation

The supplied tray matches the 40-pin backplane so the drive slides in without cables. Installation fails when the enclosure expects a different pin-out or a single-port drive, or when the Fibre Channel loop is not configured for dual-port operation. Verify the host adapter and backplane compatibility before fitting the unit.

Puncte forte

  • 300 Gb capacity stores enterprise workloads
  • 10 000 rpm spindle speeds up data access
  • Dual-port Fibre Channel provides redundant paths
  • 40-pin hot-swap tray enables tool-less replacement

Specificații

BrandHP
NAND Flash Memory TypeSLC

Întrebări despre acest articol

How can I confirm the 300Gb 10000Rpm drive is recognised and operating correctly after installation?

The system BIOS or RAID controller should detect the drive at its full 300Gb capacity and report a Fibre Channel link speed of 2Gbit; SMART data will show zero reallocated sectors and a healthy temperature range during initial workload.

What exactly ships with the 404742-001 unit and what must I source separately?

The drive arrives mounted in its hot-swap tray with the 40-pin Fibre Channel connector; no cables, brackets, screws or carrier adapters are included and must be supplied by the host enclosure.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.