HPE
HPE 804631-B21 1.60 TB 2.5" SATA internal hard drive
1.60 TB SATA solid-state drive in a 2.5-inch form factor for server workloads
- 60 TB capacity stores large datasets
- SATA 600 interface delivers 6 Gb/s throughput
- 5 inch form factor fits standard server bays
- Mixed-use endurance handles read and write workloads
- 87 oz weight simplifies rack installation
Server-Ready Mixed-Use SSD
The HPE 804631-B21 is a 1.60 TB solid-state drive built for server environments. It uses a 2.5-inch form factor and connects through a SATA interface running at 600 MB/s. The drive is rated for mixed-use workloads, balancing read and write endurance. It suits administrators who need reliable flash storage inside supported server platforms.
Replacing Spinning Disks in Server Bays
This SSD replaces 2.5-inch mechanical drives that limit random I/O and increase latency. The jump is worth it when applications demand consistent throughput for databases, virtualization or logging. It fits the same SFF bays and uses the same SATA cabling, so no backplane change is required. Buyers who need higher capacity than 1.60 TB or a different endurance class should look elsewhere.
Steady Performance Under Continuous Load
Mixed-use firmware keeps write latency stable during sustained operations rather than only in short bursts. The SATA 600 link delivers predictable bandwidth for long-running jobs such as database replays or log ingestion. Thermal throttling is managed within the server chassis airflow design. Workloads that exceed the rated write endurance will see reduced lifespan.
Puncte forte
- 60 TB capacity stores large datasets
- SATA 600 interface delivers 6 Gb/s throughput
- 5 inch form factor fits standard server bays
- Mixed-use endurance handles read and write workloads
- 87 oz weight simplifies rack installation
Specificații
| Brand | HPE |
|---|
Întrebări despre acest articol
Will the 2.5" form factor and 7.3" width fit a standard SFF server bay?
The drive is a 2.5" SFF design measuring 7.3" wide, 8.8" deep and 5.5" high, matching the standard small form factor slot used in HPE ProLiant servers.
How do I install the 804631-B21 without damaging the SATA connector?
Align the drive with the bay rails, slide it in until the SATA/600 connector seats firmly, then secure the latch; forcing it at an angle bends the connector pins.
When should I plan to replace this 1.60 TB mixed-use SSD?
Mixed-use SSDs are rated for steady write workloads; monitor SMART wear indicators and plan replacement once the media-wear metric approaches the vendor threshold.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
