SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
IBM
A 1.2 TB, 2.5-inch SAS drive spinning at 10,000 RPM with a 12 Gb/s interface, hot-swap tray and IBM 00WG704 part number
The IBM 00WG704 is a 1.2TB internal hard drive with a 2.5 inch form factor and a SAS 12Gb/s interface. It spins at 10000 RPM and is built for hot-swap server and storage arrays. The drive is supplied new in original or OEM packaging. It targets administrators who need high-speed capacity in a small bay.
The 10000 RPM spindle and SAS 12Gb/s link deliver consistent throughput for random I/O and sequential transfers under continuous load. Hot-swap support allows replacement without powering down the enclosure. Mechanical latency remains stable during extended duty cycles typical of database and virtualisation workloads.
Verify that your controller or backplane supports SAS 12Gb/s and provides a 2.5 inch hot-swap bay with the correct tray type. Confirm the system firmware recognises the drive geometry and that the power budget covers the spindle motor. Ensure cabling and airflow suit the intended rack density.
| Brand | IBM |
|---|---|
| Model | 00WG704 |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
The 10000 RPM spindle generates typical enterprise-level acoustics and heat for a 2.5" SAS 12Gb/s drive; ensure your chassis airflow matches the system builder's cooling guidelines.
A SAS 12Gb/s host bus adapter or RAID controller with a 2.5" hot-swap backplane is required; the drive uses a standard SAS connector and will not operate on interfaces other than SAS.
The 2.5" form factor needs a 2.5" hot-swap bay or adapter; the SAS 12Gb/s interface negotiates down to 6Gb/s on older controllers, so the drive will function at the lower link speed.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?